General Chemicals - Geotechnical & Environmental

An anhydrous pellet form of Calcium Chloride (CaCl2). It is the most widely used and most effective of all cement accelerators. Normally 1 to 3% calcium chloride based on the cement is used. In general calcium chloride is added to cement slurries to shorten the setting time and/or accelerate the hardening process. It can also […]

Calcium nitrate stands out as a prime calcium source for clear-water drilling. In modest amounts, calcium nitrate is a beneficial plant nutrient, contributing to the long-term goal of revegetation on well sites.

Earth Pro Chem Clean Green is the preferred cleaner for grease and grime for drilling, refining/upgrading facilities, and pipeline operations. This rig wash is a concentrated, hard-working degreaser that goes to work immediately, emulsifying and deodorizing. Its grease-fighting solvents and emulsifiers work great on heavy-duty cleaning tasks. It can also be diluted for light-duty cleaning […]

Citric Acid is often incorporated into acid formulations. Its function is to prevent the precipitation of gelatinous ferric hydroxide as the acid spends. As a sequestering agent, citric acid can hold as much as 3000 mg/L of ferric iron in spent acid solutions for more than 4 hours at temperatures above 80°C. Citric Acid is one of the most […]

Earth Pro pH Down Citric is often incorporated into acid formulations. Its function is to prevent the precipitation of gelatinous ferric hydroxide as the acid spends. As a sequestering agent, citric acid can hold as much as 3000 mg/l of ferric iron in spent acid solutions for more than 4 hours at temperatures above 80°C. Earth Pro pH Down Citric is […]

Sodium Carbonate anhydrous commonly known as Soda Ash, is a chemical compound used widely in the drilling industry as a water-based mud conditioner and contaminant treatment additive. Earth Pro pH Up Soda Ash is used to precipitate calcium in make-up water, which softens the water and elevates the water’s pH level prior to mixing mud […]

Sodium Carbonate anhydrous commonly known as Soda Ash, is a chemical compound used widely in the drilling industry as a water based mud conditioner and contaminant treatment additive. Soda Ash Dense Product Sheet

Sodium Bicarbonate (NaHC03) is commonly known as Bi-Carb, Baking Soda or Bicarbonate of Soda. Sodium Bicarbonate is most commonly used for treating cement contamination by precipitating the calcium as calcium carbonate and reducing the pH. The available H+ ion can reduce the pH in any drilling fluid with a pH above 8.5. As a pre-treatment […]