Polymer Additives - HDD

Earth Pro AE 851 can be used as a viscosifier, foam stabilizer, and as a flocculant to promote water clarification when clear water drilling. As a flocculant, Earth Pro AE 851 is normally used in concentrations of 1.0 L/30 m (3 singles) of hole drilled (holes larger than 222 mm will require higher concentrations). As a …

AE 851 Read More »

Earth Pro Poly-Xan a high molecular weight biopolymer of Xanthan Gum. It is used primarily as a viscosifier in fresh water, seawater or saline muds. It also provides a measure of filtration control. Earth Pro Poly-Xan (in conjunction with an oxygen scavenger) is temperature stable to 150°C. It is stable in a wide pH range and is used …

Poly-Xan Read More »

Earth Pro SynVis L is a high yield, readily dispersible, anionic, liquid synthetic polymer formulation that can act alone or as part of a complete fluid solution for varied demanding drilling situations.

Earth Pro HydraVis D is a naturally derived polymer utilized to enhance hole cleaning and cuttings transport in both salt and fresh water environments. Earth Pro HydraVis D is a concentrated product that yields 8-10 times more volume pound for pound when compared to bentonite making Earth Pro HydraVis D a suitable choice for remote site work …

HydraVis D Read More »

Earth Pro MultiMix is a dry blend of specially engineered synthetic polymers designed to flexibly bond loose ground and improve wellbore stability in difficult drilling situations. It is used to penetrate unconsolidated formations and then fully hydrate to form a sort of polymer glue holding formation in place allowing for drilling to proceed uninhibited.

Earth Pro ProPac D is a 100% active dry natural based polymer that is used to control fluid loss and enhance filter cakes. It can also be used as a high shear rate viscosity modifier or lubricant. Common usage of Earth Pro ProPac D is in Horizontal Directional Drilling, Mineral Exploration and large Bore Infrastructure drilling. …

ProPac D Read More »

Earth Pro SaltVis L is a liquid emulsion synthetic polymer that is specifically designed to hydrate to its maximum ability in salt, brackish or any raised salinity source water.

Earth Pro SynVis D is 100% active, dry granular polymer that disperses readily, resulting in easy mixing without lumps or fish eyes. Earth Pro SynVis D is primarily used for viscosity in fresh water systems, gel and/or polymer based systems. It can also be used as a viscosified filtrate to increase ROP as well as a …

SynVis D Read More »