SynVis L

• Increases viscosity to provide hole cleaning and cutting transport
• Shear thinning polymer to reduce pumping pressure demands
• Maintains hole conditions in friable zones such as overburden, silts, sands and clays
• Superior lubricating qualities eliminating vibration while increasing core recovery
• Encapsulating structure reduces swelling of clays and caving shales

Earth Pro SynVis L can be added either by either batch measuring the prescribed amount and adding at a point of agitation or continuous additions by poking a small hole in the bottom and top of the pail and placing near a point of agitation above the tank.

If being mixed as part of a complete polymer system add approximately 2 L for every m³ of fluid under normal drilling situations. If being mixed as a standalone product increase the mixture to 3.5-4 L/m³ and vary concentration depending on hole conditions. If being added as an overburden binder or to a bentonite system as an extender add 3 L/m³ after the bentonite has been added to the mix and allowed to hydrate.

Appearance: White to off white viscous liquid

Specific Gravity: 1.1

Type: Synthetic polymer

Ionic Charge: Anionic

Solubility: Soluble in water

WHMIS: Not controlled

TDG: Not regulated

Packaging: 20L pail