Products

• Stop lost circulation to formation by plugging fissures in rock
• Bond loose rock together end prevent sloughing
• Provide lubrication in loose, abrasive broken ground conditions

Mix the G-Stop directly in the tank with 200 times its volume water. Wait 10 minutes. Inject the mixture into the drill string. Inject a volume of water to move mixture to the correct location. Wait 20 minutes. Drill. If the problem persists attempt treatment a second time.

or

Place 1 gallon of dry G-Stop in a 20-liter pail with 10 liters of water. Allow G-Stop to partially swell. Add 1 liter of partially swollen G-Stop to the rods after the core tube has been pulled. Pump down hole and replace inner tube. Repeat as necessary to stop loss.

Appearance: Grey to light brown granular solid

Density: 1.5

Type: Hydrophilic polymer

Solubility: Insoluble

WHMIS: Not controlled

TDG: Not regulated

Packaging: 20L pail