Can-Free

Products you selected

    Request A Quote
    Filter by:

    Drilling Fluids & Additives

    Can-Free

    Earth Pro Can-Free is designed to penetrate and lubricate the medium between the drill pipe and the wellbore equalizing the pressure differences associated with differential sticking.

    To relieve deferentially stuck pipe, mix 25.0 L/m³ of Earth Pro Can-Free to diesel or crude oil. Prepare a volume that is sufficient to more than fill the annulus for the entire “stuck” interval, leaving 1.0 m³ in the drill string.

    After displacement, let the Earth Pro Can-Free mixture “soak” for at least two hours before commencing to slowly pump an additional 0.2 m³ of spotting fluid every one-half hour while the drill string is being worked.

    NOTE: To increase the density of the spotting fluid, an organophilic clay (Oilgel 3000) must be added to the oil phase.

    Add the Earth Pro Can-Free and weighting agent once the desired viscosity has been achieved. Approximately, 10.0-30.0 L/m³ of Oilgel 3000 will be required depending on the final density.

    Mixing & Handling

    Physical Properties

    Chemical Properties

    Packaging & Controls

    You might also be interested in

    Product Image

    Soap Stick FS-16

    The main application of Soap Stick FS-16 is for the reduction of mud rings, bit balling and…
    Product Image

    Drilling Detergent L

    Earth Pro Drilling Detergent L is an anionic, liquid, surface wetting agent. It can be added directly…
    Product Image

    Chem Clean Green

    Earth Pro Chem Clean Green is the preferred cleaner for grease and grime. This rig wash is…

    Learn More About Our Drilling Equipment
    & Supplies

    Address