Products

Make up fluid (w/ polymer addition): 15 lb/100 gal 

Unconsolidated formations: 20-30 lb/100 gal. 

Tru-Bore loses effectiveness in hard, low pH or salt water. To achieve the maximum yield of 240-260 bbl, the make up water should be treated with soda ash (sodium carbonate) to a pH of 8.0-9.0. Do not use salt water since it cannot be treated.

Tru-Bore is dry bentonite clay and requires high shear and agitation for proper hydration. It should be mixed no faster than five minutes per sack. Always mix bentonite before polymers. Cold water increases mixing time.

Tru-Bore concentrations vary dependent on the application and type of additives used. A concentration of 15-25 pounds of Tru-Bore per 100 gal of fluid yields a viscosity of approximately 45 seconds on a Marsh Funnel. At a rate of 27 lb per 100 gal, viscosity can climb to 60 seconds.

Appearance: Light tan to grey powder/granules 

Specific Gravity: 2.45-2.55 

Melting Point: 1450°C

Bulk Density: 49-55 lb/ft³

Type: Natural mineral, montmorillonite

Solubility: Insoluble, forms colloidal suspension

pH: 8.0 - 10.0 (5% aq. suspension)

WHMIS: Controlled (see MSDS)

TDG: Not regulated

Packaging: 50lb sack