Products

• Shale stabilization/inhibition
• Minimized viscosity increases
• Added lubricity and lower fluid loss
• Improved filter cake quality
• Readily dispersible with no formation of fisheyes.
• The solid grade form is more cost effective than liquids
• Environmentally friendly

Because of its excellent dispersibility and mixing, Hyperdrill AF 247RD can be added directly to the mud system without pre-wetting in a solvent.

A small hole should be cut into the bottom of the bag, allowing it to flow at a steady rate into the mud hopper. If necessary Hyperdrill AF 247RD may be pre-hydrated at concentrations of 10.0-15.0 kg/m³ in a separate tank and fed into the main circulating system to maintain concentrations of 2.0-6.0 kg/m³.

Hyperdrill AF 247RD becomes very slippery when it comes in contact with water. A spill should be cleaned up with an absorbent material. It is advisable to use a dust mask and eye protection while mixing all powdered products.

Appearance: White granular powder

Bulk Density: 0.7 kg/m³

Type: Co-polymer 

Solubility: Dispersible-soluble

pH: 6.0 - 8.0 (0.5% solution)

Microtox: >91% @ 3.0 kg/m³

WHMIS: Controlled (see MSDS)

TDG: Not regulated

Packaging: 25kg sack