Products

• Emulsion stability and fluid loss control
• Good oil wetting performance
• Good PV/YP ratio for the emulsified fluid

Oil mud systems using Earth Pro Emul can be prepared using the proper amounts of oil, water, lime, Earth Pro Emul and electrolytes to form a stable invert emulsion.

Although the use range can vary with well conditions the general addition rate would be 5.0 – 20.0 L/m³. For example a concentration of 5 L/m³ Earth Pro Emul will provide a stable invert emulsion in unweighted muds.

Muds weighted to 1400 kg/m³ will require 15 L/m³ Earth Pro Emul as additional emulsifier is required to oil wet the suspended solids.

Earth Pro Emul is often used in conjunction with Earth Pro Wet as required by muds with very high solids content. The amount of Earth Pro Emul should always equal or be higher than the amount of Earth Pro Wet used. Employ rubber gloves, rubber apron, and skin and eye protection and ensure mixing is done in an area with adequate ventilation.

Appearance: Amber liquid

Specific Gravity: .91

Pour Point: <-20°C

Flash Point: >93°C (PMCC)

Type: Blend of surface active agents

pH: 7.0 - 8.0

WHMIS: Controlled (see MSDS)

TDG: Not regulated

Packaging: 208L drum