Products

Earth Pro Brine-Lube reduces friction in areas where the drill string comes into contact with formation or casing. It may be added as a percentage (1.0-3.0% by volume) of the fluid system where torque and drag are a continuous problem.

Soft shale will have fewer tendencies to adhere to bits and drill collars when Earth Pro Brine-Lube is present in the drilling fluid.

To minimize bit balling add 6.0-12.0 L/m³ Earth Pro Brine-Lube and maintain this concentration with additions at the pump suction.

To help prevent differential sticking maintain 15-25.0 L/m³ of Earth Pro Brine-Lube in the mud system.

Add Earth Pro Brine-Lube at the pump suction for reduction of torque and drag.

Earth Pro Brine-Lube can be added as required to improve the sliding of the drill string when building or maintaining hole angle. Skin and eye protection should be observed.

(See Material Safety Data Sheet for further information).

Appearance: Red liquid

Specific Gravity: 0.93

Pour Point: -25°C

Flash Point: >100°C (CC)

Type: Blend

Solubility: Dispersible in water and brine

pH: 6.0 - 8.0

WHMIS: Not controlled

TDG: Not regulated

Packaging: 205 liter drum