Products

• Seal micro-fractures in rock to prevent water infiltration and eventual breakdown
• Reduced torque and drag on rotating assemblies
• High temperature seepage loss material applications

For optimum performance, Boreliner should be added to a system before the troublesome zone is penetrated or as soon after as possible. Premix the prescribed amount or Boreliner in the surface system by adding it at a point of agitation near a mixer in the tank.

For enhancing filter cake in troublesome shale and sands use a concentration of 9.0 to 17.0 kg/m³. For shock treatment of a zone that has already been penetrated mix 20-30 kg/m³ in the initial 2-3 m³ of fluid then maintain the concentration at 5-10 kg/m³ until the zone has been completely drilled and 1 hour afterwards.

Boreliner is a hydrocarbon based product which is not considered biodegradable. The dust from the product warrants the use of a dust mask when mixing and handling to prevent inhalation. At low concentrations the product is non toxic to the environment.

Appearance: Black solid

Specific Gravity: 1.04 - 1.08

Flash Point: 310°C

Solubility: Insoluble

WHMIS: Not controlled

TDG: Not regulated

Packaging: 50lb bag