Products

• Excellent solubility in cold conditions
• Carefully controlled, low molecular weight
• Saves energy costs and unnecessary delays associated with conditioning the mud
• Improved dispersibility control over conventional PHPA’s
• Provides added lubrication and lowers fluid loss
• Improves filter cake quality and is readily dispersible with no formation of fish eyes
• Environmentally friendly

Because of its excellent dispersibility and mixing Alcomer 60RD can be added directly to the mud system without pre-wetting in a solvent.

A small hole should be cut into the bottom of the bag, allowing it to flow at a steady rate into the mud hopper. If necessary Alcomer 60RD can be prehydrated at concentrations of 10.0-15.0 kg/m³ in a separate tank and fed into the main circulating system to maintain concentrations of 2.0-6.0 kg/m³.

Alcomer 60RD becomes very slippery when it comes in contact with water. A spill should be cleaned up with an absorbent material. It is advisable to use a dust mask and eye protection while mixing all powdered products.

Appearance: Off white powder

Specific Gravity: 0.85

Type: Co-polymer

Solubility: Dispersible - Soluble

Microtox: >91% @ 3.0 kg/m³ (LMW Anionic)

WHMIS: Not controlled

TDG: Not regulated

Packaging: 25kg sack