General Chemicals - Water Well

Products you selected

    Request A Quote
    Filter by:

    Drilling Fluids & Additives

    General Chemicals - Water Well

    Calcium Nitrate

    Calcium Nitrate is an excellent source of calcium for clear-water drilling. In moderate quantities nitrates are a plant nutrient and can ultimately be consumed, actually aiding in the goal of revegetation of well sites. Maintain a minimum of 250 mg/L of calcium ion while floc-water drilling. Calcium Nitrate can also be used as a calcium source in invert oil emulsions and …

    Calcium Nitrate Read More »

    Chem Clean Green

    Earth Pro Chem Clean Green is the preferred cleaner for grease and grime. This rig wash is a concentrated, hard-working degreaser that goes to work right away, emulsifying and deodorizing. Its grease-fighting solvents and emulsifiers work great on heavy-duty cleaning tasks. It can also be diluted for light-duty cleaning tasks. Chem Clean Green Product Sheet

    pH Down Citric

    Earth Pro pH Down Citric is often incorporated into acid formulations. Its function is to prevent the precipitation of gelatinous ferric hydroxide as the acid spends. As a sequestering agent, citric acid can hold as much as 3000 mg/l of ferric iron in spent acid solutions for more than 4 hours at temperatures above 80°C. Earth Pro pH Down Citric is …

    pH Down Citric Read More »

    pH Up Soda Ash

    Sodium Carbonate anhydrous commonly known as Soda Ash, is a chemical compound used widely in the drilling industry as a water-based mud conditioner and contaminant treatment additive. Earth Pro pH Up Soda Ash is used to precipitate calcium in make-up water, which softens the water and elevates the water’s pH level prior to mixing mud …

    pH Up Soda Ash Read More »

    Soda Ash for Non-Oilfield

    Sodium Carbonate anhydrous commonly known as Soda Ash, is a chemcial compound used widely in the drilling industry as a water based mud conditioner and contaminant treatment additive. Soda Ash Dense Product Sheet

    Sodium Bicarbonate

    Sodium Bicarbonate (NaHC03) is commonly known as Bi-Carb, Baking Soda or Bicarbonate of Soda. Sodium Bicarbonate is most commonly used for treating cement contamination by precipitating the calcium as calcium carbonate and reducing the pH. The available H+ ion can reduce the pH in any drilling fluid with a pH above 8.5. As a pre-treatment …

    Sodium Bicarbonate Read More »

    Citric Acid

    Citric Acid is often incorporated into acid formulations. Its function is to prevent the precipitation of gelatinous ferric hydroxide as the acid spends. As a sequestering agent, citric acid can hold as much as 3000 mg/L of ferric iron in spent acid solutions for more than 4 hours at temperatures above 80°C. Citric Acid is one of the most …

    Citric Acid Read More »

    Calcium Chloride 94-97% – Mini Prills

    An anhydrous pellet form of Calcium Chloride (CaCl2). It is the most widely used and most effective of all cement accelerators. Normally 1 to 3% calcium chloride based on the cement is used. In general calcium chloride is added to cement slurries to shorten the setting time and/or accelerate the hardening process. It can also …

    Calcium Chloride 94-97% – Mini Prills Read More »

    Learn More About Our Drilling Equipment
    & Supplies