Cements & Grouts - Geotechnical & Environmental

Enviroplug No.8 is a high-swelling Wyoming Bentonite in granular form. The unique molecular structure allows them to absorb five times their weight of water and swell to a volume of 12 to 16 times their dry bulk, making it an ideal well sealant. Applied dry or in a pumpable slurry, the fine granules expand against …

Enviroplug No.8 Read More »

Coated Enviroplug Tablets make a high density, low permeability seal between sand packs and high solids bentonite grouts, and isolate screen sections in multi-completion wells. Hydration of Coated Enviroplug Tablets is slowed due to their coating, and can therefore be placed through a tremie line. This results in deeper, more predictable tablet placement. Their coated exterior …

Enviroplug Tablets (Coated and Uncoated) Read More »

Grout-Well and Grout-Well DF are one step bentonite grouting materials designed to achieve low permeability seals in water wells, monitor wells, geotechnical borings, and heat pump holes. They achieve a range of solids contents, 17% to 20% solids by weight. Grout-Well DF’s granular nature reduces dusty conditions during mixing operations.

Portland Cement is a high quality, cost-effective basic cement used in Mineral Exploration, Geotechnical & Environmental, HDD, Oil Sands Coring and Water Well drilling applications. Portland Cement meets or exceeds all applicable chemical and physical requirements of ASTM C 150 and CSA A3000-03 (formerly A5-98). Portland Cement can be used where early strength is required …

Portland Cement Read More »

Enviroplug Coarse is made of pure ‘Wyoming Bentonite’, and was the first bentonite chip developed and marketed. Enviroplug has been used for abandoning holes since 1983. Enviroplug is used in sealing and plugging applications. Enviroplug Coarse swells to fill voids, exerting pressure against all surfaces to create a flexible low permeability seal. Since Enviroplug is introduced …

Enviroplug Coarse Read More »

Enviroplug Grout is a patented formula bentonite product designed to be used as a water well grouting fluid, drill hole abandonment fluid, grout for geotechnical monitoring wells after casing placement, and other geotechnical construction applications requiring non-destructible sub-grade seals. Once in place, Enviroplug Grout begins to set and assumes a caulk-like consistency that contacts formations to establish a low …

Enviroplug Grout Read More »

Enviroplug Medium is made of pure ‘Wyoming Bentonite’, and was the first bentonite chip developed and marketed. Enviroplug has been used for abandoning holes since 1983. Enviroplug is used in sealing and plugging applications. Enviroplug Medium swell to fill voids, exerting pressure against all surfaces to create a flexible low permeability seal. Since Enviroplug is introduced in a “dry” …

Enviroplug Medium Read More »

Enviroplug No.20 is a high-swelling Wyoming Bentonite in granular form. The unique molecular structure allows them to absorb five times their weight of water and swell to a volume of 12 to 16 times their dry bulk, making it an ideal well sealant. Applied dry or in a pumpable slurry, the fine granules expand against casings …

Enviroplug No.20 Read More »