Products

Specialty Additives

Aluminum Powder 200

Aluminum Powder 200 is a finely ground aluminum (13μ) used to formulate expanding type cements. It can be used to formulate expanding cement slurries. The aluminum reacts with the alkalis in the cement slurry to produce small bubbles of hydrogen gas. The reaction, and thus the degree of…

Citric Acid

Citric Acid is often incorporated into acid formulations. Its function is to prevent the precipitation of gelatinous ferric hydroxide as the acid spends. As a sequestering agent, citric acid can hold as much as 3000 mg/L of ferric iron in spent acid solutions for more than 4 hours at temperatures…

Citric Acid

Metso 66

Metso 66 is a cement pre-flush additive designed specifically for the removal of oil-related drilling fluids from the wellbore. This silicate-based material contains a superior detergent package which quickly breaks down and emulsifies oil-muds for rapid and complete cleanup. Secondly, Metso 66…

Metso 66

Plug Sand

Plug Sand is a specifically-graded 8/16 mesh sub-rounded sand used primarily as a temporary plugging or diverting agent in oilfield work-over applications. The semi-rounded nature of the particles will not contribute substantially to a densely packed matrix after placement, which will allow nominal…

Plug Sand

Red Dye for Cementing

Earth Pro Red Dye is a synthetic iron oxide pigment used to color cement or water based fluids. Oilfield Cementing Colorant: Earth Pro Red is a water dispersible pigment, which can be used as an indicator for determining the pre-flush/cement interface when cementing oilfield casing. Typical…

Red Dye for Cementing

Stimpro 763

Stimpro 763 is a water soluble surfactant blend used to penetrate and disperse oil wet solids.  Stimulation: As an additive added to acid, Stimpro 763 will remove hydrocarbon film from oil coated scale or hydrocarbon covered carbonate rock. This allows for better penetration of hydrochloric acid.…