Products

Polymer Additives & Breakers

AE 851

Earth Pro AE 851 can be used as a viscosifier, foam stabilizer, and as a flocculant to promote water clarification when clear water drilling.  As a flocculant, Earth Pro AE 851 is normally used in concentrations of 1.0 L/30 m (3 singles) of hole drilled (holes larger than 222 mm will require…

AE 851

Can-Break ECA

Earth Pro Can-Break ECA is an enzyme blend designed to breakdown and consume a wide range of natural and synthetic polymer chains excluding Xanthan gums.  Earth Pro Can-Break ECA works best in systems where down hole temperatures are below 60°C and the pH of the fluid has been reduced to 5.0…

Can-Break ECA

CombiVis L

Earth Pro CombiVis L is a liquid suspension of natural polymer, synthetic polymer and poly anionic cellulose. Earth Pro CombiVis L is primarily used as a single pail broad spectrum viscosifier but can also be used for fluid loss control as well as encapsulation and lubrication. Used mainly…

CombiVis L

HydraVis D

Earth Pro HydraVis D is a naturally derived polymer utilized to enhance hole cleaning and cuttings transport in both salt and fresh water environments. Earth Pro HydraVis D is a concentrated product that yields 8-10 times more volume pound for pound when compared to bentonite making Earth…

HydraVis D

HydraVis L

Earth Pro HydraVis L is a liquid suspension of natural polymer and is used for viscosifying in fresh, brackish and/or salt water. It is best suited where dry polymers can not be dispersed and hydrated easily. Earth Pro HydraVis L is generally used as a viscosifier but can also be used as a…

HydraVis L

MultiMix

Earth Pro MultiMix is a dry blend of specially engineered synthetic polymers designed to flexibly bond loose ground and improve wellbore stability in difficult drilling situations. It is used to penetrate unconsolidated formations and then fully hydrate to form a sort of polymer glue holding formation…

MultiMix

Poly-Xan

Earth Pro Poly-Xan a high molecular weight biopolymer of Xanthan Gum. It is used primarily as a viscosifier in fresh water, seawater or saline muds. It also provides a measure of filtration control. Earth Pro Poly-Xan (in conjunction with an oxygen scavenger) is temperature stable to…

Poly-Xan

ProPac D

Earth Pro ProPac D is a 100% active dry natural based polymer that is used to control fluid loss and enhance filter cakes. It can also be used as a high shear rate viscosity modifier or lubricant. Common usage of Earth Pro ProPac D is in Horizontal Directional Drilling, Mineral Exploration and…

ProPac D

SaltVis L

Earth Pro SaltVis L is a liquid emulsion synthetic polymer that is specifically designed to hydrate to its maximum ability in salt, brackish or any raised salinity source water.

SaltVis L

SynVis D

Earth Pro SynVis D is 100% active, dry granular polymer that disperses readily, resulting in easy mixing without lumps or fish eyes.  Earth Pro SynVis D is primarily used for viscosity in fresh water systems, gel and/or polymer based systems. It can also be used as a viscosified filtrate to…

SynVis D

SynVis L

Earth Pro SynVis L is a high yield, readily dispersible, anionic, liquid synthetic polymer formulation that can act alone or as part of a complete fluid solution for varied demanding drilling situations.

SynVis L