Products

Lost Circulation Materials - Oil & Gas

Cellophane

Clear multi-sized flakes of polycellulose, with an average size of 9.5mm (3/8"). Cellophane is used in oilfield applications and cementing applications as lost circulation material. In non-oilfield applications Cellophane is used as a sealing agent supplement to other lost circulation material. …

Cellophane

Enviroplug Medium

Enviroplug Medium is made of pure 'Wyoming Bentonite', and was the first bentonite chip developed and marketed. Enviroplug has been used for abandoning holes since 1983. Enviroplug is used in sealing and plugging applications. Enviroplug Medium swell to fill voids, exerting pressure against…

Enviroplug Medium

FiberFluid

FiberFluid is a finely milled seepage control and lost circulation additive that is an effective sealing and bridging agent for depleted sands. FiberFluid exhibits superior acid solubility among cellulosic lost circulation materials and very good return permeability results. FiberFluid is a finely…

FiberFluid

Magma Fiber

Magma Fiber is a specially formulated acid soluble, extrusion spun mineral fiber for lost circulation problems. It is 97.3% soluble in a 7.5% HCL acid. It is a spun mineral fiber, which acts as a plugging and bridging agent to plug voids, fractures, and all types of permeable formations. Magma…

Magma Fiber

Prima-Seal (Medium and Coarse)

Prima-Seal is a blend of lost circulation materials specifically formulated to cover a wide range of situations common in the occurrence of lost circulation. The two grades, Medium, and Coarse, contain a blend of granules and fibers, which act as bridging and sealing agents.

Prima-Seal (Medium and Coarse)

Rubber Crumb (Coarse, Medium and Fine)

A lost circulation material made up of vulcanized rubber ground to a –20 mesh (F) 10-20 mesh (M) and a 3.5/16 mesh (C) size. Rubber Crumb is used as a seepage loss, and lost circulation material and bridging agent for all drilling fluids systems. Rubber Crumb is chemically inert and…

Rubber Crumb (Coarse, Medium and Fine)

Sawdust

Di-Corp Sawdust comes from clean, untreated, kiln-dried wood, with the moisture content typically running between 5-12%. Sawdust is the most economical and readily available lost circulation material choice for mud engineers and is the preferred product for use as an absorbent and deck clean-up on drilling…

Sawdust

Ultra Seal (XP, C and Plus)

Ultra Seal is a blend of specific micro-sized cellulose fibers, combined with a blend of organic polymers and lubricity enhancers. It is a light tan powder that is insoluble in water. Ultra Seal-XP is the fine grind material that is most effective for controlling seepage and providing…

Ultra Seal (XP, C and Plus)

Walnut (Coarse, Medium and Fine)

A lost circulation material of ground Walnut is available in three grades, fine, medium, and coarse; ranging in size from 100 mesh to 6 mesh. Used as a lost circulation material or bridging agent due to its granular nature. Walnut is chemically inert and may be added to any mud system. Walnut is…

Walnut (Coarse, Medium and Fine)