Products

2 Inch HydraSleeves

Unlike any other groundwater sampler, the HydraSleeve instantaneously cores a whole water sample from a defined vertical and horizontal interval (usually within the well screen). HydraSleeve samples do not blend fluid from different vertical zones or pull water in from outside the well screen,…

2K7 Solution W-M

2K7 Solution W-M is a highly effective bactericide. The active ingredient is 2-Bromo-2- Nitropropane-1,3-Diol (BNPD) delivered as a winterized liquid. 2K7 Solution W-M should be added to fracturing fluid at 0.5-1 L/m³. Deactivation of the biocide can be accomplished by raising…

2K7 Water Soluble Paks

2K7 Water Soluble Paks (Bronopol) are a highly effective bactericide. For convenience of handling, the product is packaged in a 1kg water-soluble package within a disposable outer poly bag. The water-soluble package is used to minimize exposure to the bactericide.

2K7 Water Soluble Paks

3 Meter (10 Foot) Complete Quadlatch Core Barrel Assembly

Quadlatch Wire Core Barrels, are ideal for deep hole continuous coring. These barrels are a double tube system with a heavy duty sealed bearing supported shaft allowing for smooth trouble free operation. The Quadlatch Core Barrel provides positive latching at any hole angle.…

3 Meter (10 Foot) Complete Quadlatch Core Barrel Assembly

4 Inch HydraSleeves

Unlike any other groundwater sampler, the HydraSleeve instantaneously "cores" a whole water sample from a defined vertical and horizontal interval (usually within the well screen). HydraSleeve samples do not blend fluid from different vertical zones or pull water in from outside the well screen,…

4 Inch HydraSleeves

4 Roller Oven

The 4-Roller Oven is an effective aid in determining the effects of temperature on drilling fluid as it circulates through the well bore. The roller oven is designed to provide heating and rolling functionality simultaneously or independently. This oven can hold six 260-mL Aging Cells or three…

4 Roller Oven

5 Roller Oven

The 5-Roller Oven is an effective aid in determining the effects of temperature on drilling fluid as it circulates through the well bore. The roller oven is designed to provide heating and rolling functionality simultaneously or independently. This oven can hold twelve 260-mL Aging Cells or…

5 Roller Oven

Activated Carbon

Activated Carbon is a very active product with a high proportion of medium and large pores. It is recommended for the adsorption of large quantities of high molecular weight substances. The use of granular Activated Carbon in wastewater treatment systems is a proven process for removal of organic compounds.…

Activated Carbon

ADW600 Survey Winch

The ADW600 is a compact borehole winch. It is designed for 600 m of 1/8"-wire rope. The main components are: Helicoidal spindle for automatic laying of cable on drum Electronic depth encoder with display Frequency controlled asynchronous electric motor (0.75 kW) Electric motor brake that keeps the wireline…

ADW600 Survey Winch

AE 851

Earth Pro AE 851 can be used as a viscosifier, foam stabilizer, and as a flocculant to promote water clarification when clear water drilling.  As a flocculant, Earth Pro AE 851 is normally used in concentrations of 1.0 L/30 m (3 singles) of hole drilled (holes larger than 222 mm will require…

AE 851

Alcomer 120L OS

Alcomer 120L OS is a synthetic, high molecular weight, anionic, acrylamide-based copolymer. It is supplied as a high activity, water-free dispersion of polymer in a low-toxicity mineral oil. Alcomer 120L OS is a truly multi-functional product used primarily as a viscosifier and as a borehole stabilizer…

Alcomer 120L OS

Alcomer 755 / Zetag 7557

Alcomer 755 / Zetag 7557 is an effective cationic flocculent used for clear water drilling and fluid clarification in closed systems. It is very effective in dewatering water-based systems, especially those that contain significant amounts of potassium salts, biopolymers, and PACs.

Alcomer 755 / Zetag 7557

Alcomer 758 / Zetag 7587

Alcomer 758 / Zetag 7587 is an effective cationic flocculent used for clear water drilling and fluid clarification in closed systems. It is very effective in dewatering water-based systems, especially those that contain significant amounts of potassium salts, biopolymers, and PACs.

Alcomer 758 / Zetag 7587

Alkapam A-1103D

Alkapam A-1103D is an effective anionic polymer flocculant used for clear water drilling. It should be added through a chemical barrel at the flow line or injected directly into a centrifuge from a premixed polymer tank, usually in a 0.5% stock solution. It can also be used for fluid clarification…

Alkapam A-1103D

Alturnamats

Alturnamats are perfect tracks where heavy vehicles must pass across mud, lawns or soft terrain. They are made of 100% recycled polyethylene plastic. Super tough and flexible enough to conform to ground contour as well as strong enough to support tons of equipment. The mats are weather proof, 1/2" thick,…

Alturnamats

Aluminum Powder 200

Aluminum Powder 200 is a finely ground aluminum (13μ) used to formulate expanding type cements. It can be used to formulate expanding cement slurries. The aluminum reacts with the alkalis in the cement slurry to produce small bubbles of hydrogen gas. The reaction, and thus the degree of…

Analytical Balance

The OHAUS Adventurer Pro is one of the most versatile balances in the industry. It counts, sums, holds, and delivers traceable results. Operation is fast and usually takes only three seconds for settings to stabilize. It is provided with an AC adapter for 230 or 115 volt operation. Size: 15.5" ×…

Analytical Balance

Aquabloc HT

Aquabloc HT is a modified starch specifically developed as a filtration control additive for drilling and completion fluids in the Canadian market. Aquabloc HT is recommended to be used in fluids containing salts and exposed to high temperatures. It provides fluid loss control over a wide…

Aquatreat H2S (Liquid)

Aquatreat H2S is a water-soluble Sulfide scavenger. Aquatreat H2S is an aqueous amine resin solution containing surfactants which when added to a water-based drilling fluid permanently removes toxic H2S. Aquatreat H2S is an amine blend designed to scavenge H2S in water based drilling fluids.…

Barite for Cementing

Barite (ground barium sulphate (BaSO4)) in its pure form is chemically inert in fresh water and oil based drilling fluids. It can be used to increase mud densities to as high as 2400 kg/m³. Barite increases the hydrostatic pressure of the drilling mud allowing it to compensate for high-pressure…

Barite for Cementing

Barite for Non-Oilfield

Barite is a weighting material possessing a specific gravity ranging from 4.2 to 4.3  It is used in all muds to increase the density or weight. Mud weights up to about 20 ppg can be obtained without incurring strains on pump equipment. 

Barite for Non-Oilfield

Barite for Oilfield

Barite (ground barium sulphate (BaSO4)) in its pure form is chemically inert in fresh water and oil based drilling fluids. It can be used to increase mud densities to as high as 2400 kg/m³. Barite increases the hydrostatic pressure of the drilling mud allowing it to compensate for high-pressure…

Barite for Oilfield

Basic Test Kit

In addition to the standard mud balance, marsh funnel, and cup, the Basic Test Kit provides ample room for equipment and extra chemicals that just don't seem to fit in conventional testing equipment kits. As with all of our equipment, this kit may be custom fitted to meet specific requirements. Size:…

Basic Test Kit

Big Bear Rod Grease

Earth Pro Big Bear Rod Grease is specially thickened extreme pressure grease with additives that provide corrosion, wear and oxidation resistance. Tackiness assures adherence to drill rods while providing superior resistance to water washing and centrifugal separation. It possesses the…

Big Bear Rod Grease

Bio Bear Rod Grease

Earth Pro Bio Bear Rod Grease is a blend of naturally sourced oil and non-toxic surfactants. It can be used to lubricate the outside of drill rods or as grease for slides on rod handlers. Earth Pro Bio Bear Rod Grease can be used as an environmentally friendly alternative to heavy metal mineral…

BioFoam

Earth Pro BioFoam is a surfactant blend foam for drill cutting removal in under balanced fluid systems. Used primarily as a drilling foam that carries cuttings to the surface, Earth Pro BioFoam can also be used as a dust suppressant and as a discharge auger coolant.

BioFoam

Bit Gauges

Di-Corp Rod & Bit Gauges ensure that your gear is operating within it’s service life, optimizing productivity and safety. Many Drillers choose to use our gauges as a fail safe on-site checking mechanism which decreases potential downtime due to normal product wear and/or failure.

Bit Gauges

Bitu-Seal

Earth Pro Bitu-Seal is used as a used as a fluid loss reducer and wellbore strengthener in a variety of oil and water based drilling fluids. High performance and thermal stability Effective in multiple applications Secondary effects - improved lubricity and electrical stability

Blank End Adaptor Subs - Solid

Blank End Adaptor Subs on solid material allow for more size options to be machined on the blank end. These subs are machined from high quality alloy steel and depending on the size and thread configuration, may be heat treated and/or identified with special geometries.  For more information or…

Blank End Adaptor Subs - Solid

Blank End Adaptor Subs - Tubular

Blank End Adaptor Subs on tubular material allow for same size thread options to be machined on the blank end. These tubular subs are designed to be used as crossover components on the drill string, when adapting two different thread forms of the same tubing diameter. These subs are machined from high…

Blank End Adaptor Subs - Tubular

Bolted Couplings

Bolted Couplings are either galvanized or stainless steel shells which are easy to install. Precision cut inner sleeves and gaskets, available in white, silicone and Viton. The thick stiffener bars provide added strength and thick 1/8" black neoprene gaskets are standard. Stainless anti-static strips…

Bolted Couplings

Borate Crosslinker

Borate Crosslinker is a buffered borate based crosslinker used to crosslink linear gels of guar and hydroxypropyl guar (HPG) biopolymers. Borate Crosslinker is designed to react with hydroxyl groups on the guar gum or HPG polymer backbone to create a viscoelastic fluid which is shear thinning and…

Boreliner

Boreliner can be thought of as powdered pavement for unstable wellbores, suitable to use in all water based drilling fluid systems. Boreliner is a treated blend of very fine ground natural occurring high melting point hydrocarbon resins. Boreliner is used to control sloughing formation by…

Boric Acid

Boric Acid, also called hydrogen borate, boracic acid, orthoboric acid and acidum boricum, is a weak, monobasic Lewis acid of boron. Boric Acid and the borate salts (Na+, K+ in particular), are well known and have long been utilized in the oilfield in fracturing services. Borates perform exceptionally…

Bottom Weights

Bottom weights are solid stainless steel weights that attach to the bottom of standard HydraSleeve no-purge sampler. These weights come in 5 oz., 8 oz., and 16 oz size options and are reusable. All bottom weights come with a reusable clip. See below for further specifications by weight size. 

Bottom Weights

Brine-Cor

Earth Pro Brine-Cor is a non-foaming, water and brine soluble, highly effective brine corrosion inhibitor designed to provide corrosion protection for mild steel and most other metals in both low and high temperature systems. Earth Pro Brine-Cor corrosion inhibitor is effective in low and…

Brine-Lube

Earth Pro Brine-Lube is a non-foaming, water dispersible highly effective lubricant designed to provide surface to surface lubrication allowing solids to slide by one another very easily. Earth Pro Brine-Lube is used as a lubricant in brine and fresh-water based drilling fluids to reduce torque and…

Brine-Oxy

Earth Pro Brine-Oxy is a non-foaming, water and brine soluble, highly effective oxygen scavenger and metal passivator. Earth Pro Brine-Oxy is a liquid oxygen scavenger designed to control corrosion due to dissolved oxygen in drilling fluids and in particular in brine based drilling fluids. Earth Pro…

Buffered Clay Stabilizer

Buffered Clay Stabilizer is a blend of choline chloride and formic acid. It is designed to prevent hydration of water sensitive shale. It is also useful to control the pH of water based fracturing fluids in the range 4.0 to 5.0. This pH range is optimal for quick hydration of guar gum. Typical loading…

BW - Casing

The Di-Corp Wire Line Casing offering includes the industry standard ‘W’ design in all sizes as well as the commonly used ‘WT’ design used in the larger diameter product. Carbon steel tubing, produced to the Di-Corp tubing specification ensures a tough, strong, straight,…

BW - Casing

Cal Carb 0

Calcium Carbonate (CaCO3) is a naturally occurring, ground limestone used in Oilfield and Cementing applications. As Cal Carb 0 grind, this finer grade of Calcium Carbonate is used primarily as a weighting material. Cal Carb 0 readily dissolves in the presence of hydrochloric acid. Because…

Cal Carb 0

Cal Carb 325

Calcium Carbonate (CaCO3) is a naturally occurring, ground limestone. As Cal Carb 325 grinds, this finer grade of Calcium Carbonate is used primarily as a weighting material. Calcium Carbonate readily dissolves in the presence of hydrochloric acid. Because of this, Cal Carb 325 is an ideal weighting…

Cal Carb 325

Cal Carb Poultry Grit

Cal Carb Poultry Grit is a large grind carbonate with a particle size larger than Cal Carb 0, Cal Carb 325 and Cal Carb Supercal - Glass Rock grind. It can be used in combination with other sized carbonates to provide a wide spectrum of bridging agents for drilling fluids. Its acid solubility…

Cal Carb Poultry Grit

Cal Carb Supercal - Glass Rock

Cal Carb Supercal - Glass Rock is a medium grind carbonate with a particle size larger than Cal Carb 0 or Cal Carb 325 grind, but less than Cal Carb Poultry Grit. It can be used in combination with other sized carbonates to provide a wide spectrum of bridging agents for drilling fluids. Its acid solubility…

Cal Carb Supercal - Glass Rock

Calcium Chloride 94-97% - Mini Prills

Calcium Chloride 94-97% - Mini Prills is anhydrous pellet form of Calcium Chloride (CaCl2). It is the most widely used and most effective of all cement accelerators. Normally 1 to 3% calcium chloride based on the cement is used. In general calcium chloride is added to cement slurries to shorten…

Calcium Chloride 94-97% - Mini Prills

Calcium Chloride Powder

Calcium Chloride Powder is used as an inhibitor to control active shale and clay dispersion. It can be used in polymer mud to minimize the formation of gas hydrates. Calcium Chloride Powder can be used to formulate fluid systems when formation pressures call for densities ranging from 8.4…

Calcium Chloride Powder

Calcium Nitrate

Calcium Nitrate is an excellent source of calcium for clear-water drilling. In moderate quantities nitrates are a plant nutrient and can ultimately be consumed, actually aiding in the goal of revegetation of well sites. Maintain a minimum of 250 mg/L of calcium ion while floc-water drilling. Calcium…

Calcium Nitrate

Calibration Solutions

Di-Corp offers a range of Calibration Solutions. For the full range of products or to request a specific product please contact Di-Corp.  Example products include the following... Part Number Description EX1174 Conductivity Standard 1.41 MS (60 mL) EX2011 Sodium Standard 150 mg/L (60 mL) EX2012…

Calibration Solutions

Can-Break ECA

Earth Pro Can-Break ECA is an enzyme blend designed to breakdown and consume a wide range of natural and synthetic polymer chains excluding Xanthan gums.  Earth Pro Can-Break ECA works best in systems where down hole temperatures are below 60°C and the pH of the fluid has been reduced to 5.0…

Can-Break ECA

Can-Free

Earth Pro Can-Free is designed to penetrate and lubricate the medium between the drill pipe and the wellbore equalizing the pressure differences associated with differential sticking. To relieve deferentially stuck pipe, mix 25.0 L/m³ of Earth Pro Can-Free to diesel or crude oil. Prepare a volume…

Can-Free

Carbonado Bits

Di-Corp manufactures a line of bits commonly referred to as Carbonados. They are very similar to surface set bits but use carbonado diamonds which are considerably tougher and more wear resistant than the natural diamonds used in conventional surface set bits. As a result, the Carbonado Bits perform…

Carbonado Bits

Casing Advancement System

Casing Advancement Systems consists of drilling through overburden while advancing the casing into the hole at the same time. Casing Advancement Systems are the preferred method for drilling in difficult ground conditions including loose formations and where boulders are present. Jentech (a division…

Casing Advancement System

Casing Advancers

The Di-Corp Casing Advancer consists of an Inner Assembly (includes a loading funnel) and a Driver Coupling. Di-Corp Casing Advancer Assemblies will ensure that casing through overburden is as efficient as possible providing a quick and fail safe retrieval of the Inner Assembly once bedrock is reached.…

Casing Advancers

Casing Alignment Clamps

Casing Alignment Clamps are simple, quick, and easy to use. Pull the hand lever and the flat cross bars quickly align two casing ends so they can be accurately tack-welded together. Remove the clamp and finish the welding. Jentech (a division of Di-Corp) offers a range of Casing Alignment Clamps in…

Casing Alignment Clamps

Casing Bits

Di-Corp offers a premium Casing Bit set to bit gauge. It is best suited for more difficult overburden drilling conditions including boulders. It offers increased life with increased diamond concentration and extended impregnation depth. Casing Bits are used in deep, difficult overburden…

Casing Bits

Casing Shoes

Di-Corp offers three versions of Casing Shoes - Level 1, Level 2 and Carbonado. The Level 1 is a general purpose casing shoe suited for most drilling conditions through overburden (no boulders) and the Level 2 is a premium shoe for more difficult overburden drilling conditions which offers…

Casing Shoes

Caustic Potash

Potassium Hydroxide (KOH) or Caustic Potash is a basic alkali used in a variety of industrial processes. Its advantage over caustic soda (NaOH) in the oil well drilling industry is that it also provides a source of K+ ions while providing pH control. Economical resource of hydroxyl ions…

Caustic Soda Beads

Caustic Soda Beads (Sodium Hydroxide (NaOH)) are a strong alkali used to increase the pH and alkalinity of the liquid phase.  To obtain a given pH, the amount needed may be affected by a variety of drilling fluid products and related activities. The following chart is an approximation only.…

Caustic Soda Beads

Cellophane

Clear multi-sized flakes of polycellulose, with an average size of 9.5mm (3/8"). Cellophane is used in oilfield applications and cementing applications as lost circulation material. In non-oilfield applications Cellophane is used as a sealing agent supplement to other lost circulation material. …

Cellophane

Cement Permeameter with Data Acquisition System

The Cement Permeameter is utilized to measure the permeability of cement core specimens one inch in diameter and one inch in length. A core specimen is placed into a core sleeve, which is then inserted into the Modified Hassler style test cell. Nitrogen at a constant flow rate is forced through…

Cement Permeameter with Data Acquisition System

Centralizers

Centralizers easily attach to screens and risers to prevent off center well placement. Di-Corp offers Stainless Steel as well as PVC (with clamp) Bow String Centralizers. Bow String Centralizers can provide complete centralization in vertical or slightly deviated wells. For more information on Centralizers…

Centralizers

CF Desco II

CF Desco II is used to control rheological properties in water based drilling fluids. CF Desco II is an alkaline material, which is effective in a wide pH range (optimum is suggested at 9.0-11.0) in fresh water and salt-water muds. CF Desco II is highly effective at low concentrations and is compatible…

CF Desco II

Chain Wrenches

Chain Wrenches are designed for use with a pipe machine for bucking up and bucking off tool joints. Larger sizes may be used for breaking out drill collars, reamers or similar heavy jobs. Jentech (a division of Di-Corp) offers a range a Chain Wrenches to suite any drill need. Please visit the Jentech…

Chain Wrenches

Chem Clean Green

Earth Pro Chem Clean Green is the preferred cleaner for grease and grime. This rig wash is a concentrated, hard-working degreaser that goes to work right away, emulsifying and deodorizing. Its grease-fighting solvents and emulsifiers work great on heavy-duty cleaning tasks. It can also be diluted for…

Chem Clean Green

Chemul RHM

Chemul RHM is a blend of surfactants that helps improve rheological and suspension characteristics of invert emulsion fluids. It helps increase low shear rheological properties for enhanced suspension with minimal effect on high shear properties. Using Chemul RHM with weighted invert emulsion…

Choline Chloride 75 Liquid

Choline Chloride is a minimum 75% active solution of 2-hydroxy-N,N,N-trimethylethanaminium chloride. Choline Chloride is completely water soluble and is used to control swelling of water sensitive clays. It has a small hydration radius and can easily substitute sodium ions found in the crystal…

Citric Acid

Citric Acid is often incorporated into acid formulations. Its function is to prevent the precipitation of gelatinous ferric hydroxide as the acid spends. As a sequestering agent, citric acid can hold as much as 3000 mg/L of ferric iron in spent acid solutions for more than 4 hours at temperatures…

Citric Acid

Claymean L

Earth Pro Claymean L is a drilling fluid additive (organic liquid amine) that is used for chemical inhibition of water sensitive clay and shale formations. Low chlorides within Earth Pro Claymean L, alternate to KCI or Salt Brines for the prevention of hydration of clays and shale encountered…

Claymean L

Claysperse L

Earth Pro Claysperse L is a cationic liquid dispersant and thinner for water based drilling fluids. It is primarily used for deflocculation of drill solids and as a bentonite thinner. It can also be used as a filter cake enhancer. It is best suited for fresh water systems with mud weight below…

Claysperse L

Clear PVC EcoBailers

Clear PVC EcoBailers are an eco-friendly product that is as heavy (or heavier) than conventional weighted bailers without the addition of bulky and costly weights. A better weight distribution allows the Clear PVC EcoBailer to sink straighter and the efficient valve design makes it the fastest sinking…

Clear PVC EcoBailers

CLF-40 Compressive Load Frame

The CLF-40 Automated Compressive Load Frame was designed to determine the compressive strength of a well cement or proppant. The most common means of determining the compressive strength of a cement involves applying a force to the sample at a constant rate until the sample fails. The maximum loading…

CLF-40 Compressive Load Frame

COILSav

COILSav is used for protecting coil tubing strings requiring short or long-term storage. Regular application before and after field use will ultimately lengthen the service life of the tubing string. Oilfield: COILSav will protect interior or exterior surfaces of tubing strings which may require storage…

CombiVis L

Earth Pro CombiVis L is a liquid suspension of natural polymer, synthetic polymer and poly anionic cellulose. Earth Pro CombiVis L is primarily used as a single pail broad spectrum viscosifier but can also be used for fluid loss control as well as encapsulation and lubrication. Used mainly…

CombiVis L

Compact Plus Water Swivel

Di-Corp offers both gravity and pump-in systems in double and triple tube configurations. We have incorporated a number of product improvements to ensure you remain productive, including Edge Latch for improves locking and unlocking, shielded bearing, latch locking for up-hole drilling, and inner tube…

Compact Plus Water Swivel

Compact Plus Water Swivel, Spares

Consumable wear components of the Compact Plus Water Swivel are available in a kit or as individual piece parts. These components are fully compatible with both top and side port swivel designs as well as with the industry leader’s water swivel assembly.

Compact Plus Water Swivel, Spares

Core Barrel Assemblies & Options

Di-Corp’s Surface Core Barrel offering includes standard sizes from B to P and the Pump-In Core Barrel includes B to H.  All Core Barrel Assemblies are supplied complete with the Edge-Latch Head Assembly and Conventional Locking Couplings. Options include Full Hole Locking Couplings, Softer…

Core Barrel Assemblies & Options

Core Barrel Conversions

Di-Corp offers several Core Barrel Conversion assemblies. One allows for a seamless transition from the industry leading core barrel assembly to the enhanced Edge Latch Core Barrel by replacing only a handful of simple components.  Another comes fully assembled and replaces all components…

Core Barrel Conversions

Core Barrel Head Assemblies & Options

The Edge Latch Head Assembly is a robust, reliable tool that is supplied complete with landing indication and is fully compatible with the industry leader. The Edge-Latch latching system provides an enhanced mechanism for retracting the latches, which lessens the chances of sticking a tube.  Head…

Core Barrel Head Assemblies & Options

Core Barrel Kits

Di-Corp offers both gravity and pump-in systems in double and triple tube configurations. We have incorporated a number of product improvements to ensure you remain productive, including Edge Latch for improves locking and unlocking, shielded bearing, latch locking for up-hole drilling, and inner tube…

Core Barrel Kits

Core Barrel Spares

Surface Core Barrel Spares include all of the most commonly consumed Core Barrel wear components. These kits contain Spring Pins, Bearings, Springs, Lock-Nuts, Bushings and Fittings as well as several manufactured components such as Spearhead Points, Latches, Shut-Off Valves, Core Lifter components,…

Core Barrel Spares

CoreMix

CoreMix is a polysaccharide-based product containing inhibitive potassium ion and sized calcium carbonate for filtration control. CoreMix is designed as a one-sack system for oilsand drilling and coring.  CoreMix is formulated to enhance core recovery, minimize filtrate invasion, and reduce the…

CoreMix

Corinox

Earth Pro Corinox is a unique dual-purpose corrosion prevention chemical mixture in a liquid form. It has the ability to scavenge dissolved oxygen effectively as well as the capability to adsorb onto active corrosion sites (anodes) on drill pipe, casing and tubing in water based fluids.  Because…

Corinox

CRM-19

CRM-19 is a unique polymer used in reducing the viscosity of cement slurries to improve the flow properties. In effect it lowers friction, so that turbulent flow can be achieved at lower pump rates thereby reducing overall horsepower requirements and enabling these slurries to be placed across formations…

CRM-22B

CRM-22B is a polymer-based high potency water reducer used to disperse cements and cement blends containing fluid loss additives incompatible with normal sulfonated naphthalene-based dispersants. CRM-22B is used primarily to reduce the viscosity of cement slurries to improve the flow…

CRM-22B

Curing Chamber

The Model 200 HTHP Curing Chamber is utilized to prepare well cement specimens for compressive strength tests. It is necessary to determine the amount of time required for a cement to develop compressive strength so that drilling/production operations can be resumed as quickly as possible. The goal…

Curing Chamber

Deep Hole Wireline Drill Rod

Today’s exploration efforts often require the driller to go even deeper to uncover the reserves necessary to inspire a mine. Di-Corp offers a wireline drill rod solution to meet such demands, the “D” wireline drill rod has been designed to withstand the stresses encountered at depth.…

Deep Hole Wireline Drill Rod

Defoamer Powder

Earth Pro Defoamer Powder is a cement slurry defoamer recommended to decrease foaming and minimize air entrainment in cement slurries while mixing. Oilfield Cementing: Typical dosage in field applications is 2.0-5.0 kg/ton of cement, depending on the expected severity of the foaming problem…

Defoamer Powder

Defoamer Silicone

Earth Pro Defoamer Silicone is a versatile liquid that can be used to combat mild to severe foaming or premixed as an anti-foaming agent in preparation of fluids where vigorous agitation is required, or with products that are known to have foaming tendencies.  Defoaming is a complex reaction; therefore,…

Defoamer Silicone

Depramin 96

Froth flotation is a process widely used to selectively separate valuable minerals from worthless gangue. The process relies heavily on the differences in the mineral surfaces’ hydrophobic character to accomplish this task. Most minerals in nature are hydrophilic (non-hydrophobic) and do…

Depramin 96

Depramin C

Froth flotation is a process widely used to selectively separate valuable minerals from worthless gangue. The process relies heavily on the differences in the mineral surfaces’ hydrophobic character to accomplish this task. Most minerals in nature are hydrophilic (non-hydrophobic) and do not readily…

Depramin C

DFR-5

DFR-5 is a low molecular weight polymer that may be blended with cement to reduce apparent viscosity and improve the rheological properties of cement slurries. Application rates range from 0.2 – 1.5% by weight of cement with most applications requiring less than 1%.  DFR-5 is compatible…

DFR-5

Di-Sperse 72L

Earth Pro Di-Sperse 72L is effective at any pH and due to its rapid dissolution, it immediately affects the flow properties of a drilling fluid.  Its primary function is to act as a flow control agent by reducing viscosity and gel strengths in conventional and low solids water based drilling fluids. 

Di-Sperse 72L

Di-Sperse 74

Earth Pro Di-Sperse 74 functions primarily as a flow control agent by reducing viscosity and gel strengths. It offers improved capabilities in high solids and contaminated muds and offers increased thermal stability over Earth Pro Di-Sperse 72L when drilling in green cement, salt or anhydrite stringers. 

Di-Sperse 74

Diamond Gel

Diamond Gel is a bentonite product designed with the specific needs of numerous drilling markets in mind. This premium grade beneficiated Wyoming bentonite outperforms its competitors in nearly all aspects. Diamond Gel is engineered to disperse easily under poor mixing conditions commonly found on coring…

Diamond Gel

Diamond Impregnated Bits

Di-Corp manufactures a range of Impregnated Bits that are engineered to meet a wide variety of drilling conditions. As we work with our customers to continuously improve this product, each matrix recipe is given careful consideration and is documented , only the matrices that successfully meet all of…

Diamond Impregnated Bits

Digital Resistivity Meter

The Digital Resistivity Meter accurately measures the resistivity of fluids, slurries, and semisolids having resistivities from 0.01 to 400 ohm-meters. The digital display shows both resistivity (in ohm-meters) and concentration of NaCl (in ppm, kppm, and gr/gal), as well as temperature (in °C…

Digital Resistivity Meter

Displacement Plugs

Displacement Plugs are used in diamond drilling wireline drill rods and casing for placing cement plugs or casing pack fluid. The plugs are made of natural rubber and are designed to allow positive placement of a casing pack in the casing annulus or a column of cement grout in the hole without dilution…

Displacement Plugs

Dope Brushes

Heavy duty thread compound dope brushes are engineered to hold up to the rough conditions where they are used and the materials that are being applied. Solid wood handles with rubber drip collars make for safe handling. Used to apply any bulk product.  Available in Tapered (1-1/8" x 16" Brush:…

Dope Brushes

DR-133 Polymer

DR-133 Polymer is a high yield, readily dispersible, anionic, liquid synthetic polymer formulation that can act alone or as part of a complete fluid solution for varied demanding drilling situations.

DR-133 Polymer

Drag Bits

Drag Bits are usually designed for use in soft formations such as sand, clay, or some soft rock. Drag Bits are often used in the following applications water wells, mining, geothermal, environmental and exploration drilling. Jentech (a division of Di-Corp) offers Drag Bits in both Step type and Chevron…

Drag Bits

Drilling Detergent L

Earth Pro Drilling Detergent L is an anionic, liquid, surface wetting agent. It can be added directly to the mud system and is normally used in concentrations of 0.2-0.6 L/m³. Earth Pro Drilling Detergent L is added to water based mud systems to reduce surface tension.

Drilling Detergent L

Drispac (Plus) Regular & Drispac (Plus) Superlo

Drispac (Plus) is a high molecular weight, polyanionic cellulose polymer of high purity. It is available in Regular and Superlo grades. Drispac (Plus) is a primary fluid-loss reducer for water-based drilling fluids. Drispac (Plus) Regular also provides secondary viscosity. When fluid loss control…

Drispac (Plus) Regular & Drispac (Plus) Superlo

Drive Shoes

Drive Shoes are a coupling either welded or threaded to the bottom of steel casing to prevent damage to the casing while driving or pushing the casing. Di-Corp manufactured Drive Shoes are made in house with high quality steel that is machined in our precision CNC machines and heat treated…

Drive Shoes

Drop Pipe

The Shur-Align Drop Pipe’s patented design allows for quick and safe installation for any submersible pump. The patented Shur-Align Joint is an innovative and simplistic PVC pipe assembly design; it features a simple alignment and engagement, a beveled shoulder, quick makeup, watertight seal.…

Drop Pipe

DTH Hammer & Bits

DTH Hammer and Bits are used for drilling holes through a wide range of rock types. Jentech (a division of Di-Corp) offers a range of DTH Hammers and Bits for various drilling needs. They test various DTH Hammers and Bits in everyday situations within the Water Well drilling and Mineral Exploration…

DTH Hammer & Bits

DTH Rods & Tools

Jentech (a division of Di-Corp) works closely with customers to design and provide high quality drill steel and subs for virtually all methods of drilling. From conventional drilling to core drilling, reverse circulation and dual tube, Jentech can help, with experience, quality steel and service.…

DTH Rods & Tools

Eco-Safe

Eco-Safe nonmetallic thread compound is a premium quality product containing carbon based fibers and additives and other natural extreme pressure and anti-wear additives. These are blended into a high temperature calcium complex base grease. Eco-Safe offers the additional advantage of superior adhesion…

Eco-Safe

Elevators

Elevators are a hinged device with handles that are used to wrap around the tool joint of drill pipe, casing or lift nipples (for collars) to facilitate the lifting or lowering of them singly or of the drill string as a whole. To latch around a piece of pipework a set of Elevators need…

Elevators

Emergency Spill Kit

This heavy duty Spill Kit is ideal for around the plant - place it and forget about it! The water tight, screw down lid and UV treated polyethylene overpack will last outdoors. With grab handles that make moving it easy, this container meets UN regulations as an overpack allowing…

Emergency Spill Kit

Emul

Earth Pro Emul is a one drum oil mud emulsifier based on a mixture of surfactants designed to emulsify oil in water as well as oil wet drilled solids and weighting materials. It contains primary and secondary emulsifier components as well as surfactants with oil-wetting properties.  For best…

Emul-Break

Emul-Break is a general batching demulsifier for problem emulsions, production, stimulation, and anti-sludge applications.  For Drilling Fluids: An addition rate of 0.25-1.0 L/m³ of drilling mud is recommended. Higher addition rates may be necessary for difficult situations. The…

Emul-Break

Emulsion Stability Tester

The electrical stability (ES) of an oil-based drilling fluid is a property related to its emulsion stability and oil wetting ability. The Emulsion Stability Tester determines ES by applying a precision voltage-ramped sinusoidal signal across a pair of parallel flat plate electrodes that are immersed…

Emulsion Stability Tester

Enviroplug Coarse

Enviroplug Coarse is made of pure 'Wyoming Bentonite', and was the first bentonite chip developed and marketed. Enviroplug has been used for abandoning holes since 1983. Enviroplug is used in sealing and plugging applications. Enviroplug Coarse swells to fill voids, exerting pressure against all…

Enviroplug Coarse

Enviroplug Grout

Enviroplug Grout is a patented formula bentonite product designed to be used as a water well grouting fluid, drill hole abandonment fluid, grout for geotechnical monitoring wells after casing placement, and other geotechnical construction applications requiring non-destructible sub-grade…

Enviroplug Grout

Enviroplug Medium

Enviroplug Medium is made of pure 'Wyoming Bentonite', and was the first bentonite chip developed and marketed. Enviroplug has been used for abandoning holes since 1983. Enviroplug is used in sealing and plugging applications. Enviroplug Medium swell to fill voids, exerting pressure against…

Enviroplug Medium

Enviroplug No.16

Enviroplug No.16 is a high-swelling Wyoming Bentonite in granular form. The unique molecular structure allows them to absorb five times their weight of water and swell to a volume of 12 to 16 times their dry bulk, making it an ideal well sealant. Applied dry or in a pumpable slurry, the fine granules…

Enviroplug No.20

Enviroplug No.20 is a high-swelling Wyoming Bentonite in granular form. The unique molecular structure allows them to absorb five times their weight of water and swell to a volume of 12 to 16 times their dry bulk, making it an ideal well sealant. Applied dry or in a pumpable slurry, the fine granules…

Enviroplug No.20

Enviroplug No.8

Enviroplug No.8 is a high-swelling Wyoming Bentonite in granular form. The unique molecular structure allows them to absorb five times their weight of water and swell to a volume of 12 to 16 times their dry bulk, making it an ideal well sealant. Applied dry or in a pumpable slurry, the fine granules…

Enviroplug Tablets (Coated and Uncoated)

Coated Enviroplug Tablets make a high density, low permeability seal between sand packs and high solids bentonite grouts, and isolate screen sections in multi-completion wells. Hydration of Coated Enviroplug Tablets is slowed due to their coating, and can therefore be placed through a tremie line. This…

Enviroplug Tablets (Coated and Uncoated)

Expansion Joints

Di-Corp offers both Heavy Duty Expansion Joints and Heavy Duty 2 Part Expansion Joints for Infrastructure applications such as tailings ponds, construction, slurry walls, foundations, marine, etc. We offer these in black or galvanized finishes. They are easy to install and come with all the necessary…

Expansion Joints

Extended Core Barrel Options

Di-Corp has a solution for extending your standard Core Barrel. Whether you’re coupling two standard Core Barrels together or simply extending an Inner Tube Assembly to match a stabilized Reaming Shell, Di-Corp has what you require to get the job done. In consolidated ground conditions, a core…

Extended Core Barrel Options

Extra High Yield Bentonite for Non-Oilfield

Extra High Yield Bentonite (EHYB) is specially peptized high yield bentonite that disperses and hydrates to provide excellent hole cleaning capability and well bore stabilization. This product is NSF 60 certified for use in potable water applications and is nontoxic to the environment.

Extra High Yield Bentonite for Non-Oilfield

Extra High Yield Bentonite for Oilfield

Extra High Yield Bentonite is used as the base fluid for many water-based drilling fluids. While Extra High Yield Bentonite’s primary function is to provide viscosity, it also exhibits gelling properties characteristic of fluid loss control agents. Extra High Yield Bentonite has a higher performance…

Extra High Yield Bentonite for Oilfield

FiberFluid

FiberFluid is a finely milled seepage control and lost circulation additive that is an effective sealing and bridging agent for depleted sands. FiberFluid exhibits superior acid solubility among cellulosic lost circulation materials and very good return permeability results. FiberFluid is a finely…

FiberFluid

Field Test Kits & Meters

Di-Corp offers a range of Field Test Kits & Meters. For the full range of products or to request a specific product please contact Di-Corp.  Example products include the following... Part Number Description EX1030 Ammonia Test Kit NI-8 EX1689 Meter pH Pocket Waterproof EX1690 Meter Pocket TDS…

Field Test Kits & Meters

Filter Papers

Di-Corp offers a range of Filter Papers. For the full range of products or to request a specific product please contact Di-Corp.  Example products include the following... Part Number Description EN8700 Filter Paper API 3.5" Diameter EN8800 Filter Paper API 2.5" Diameter EN8806 Filter…

Filter Papers

Filter Press, HTHP, 175 mL, 4 Unit with Regulators & Temperature Controllers

The 4-Unit HTHP Filter Press is ideal for high-volume laboratory testing. It accommodates four 175-mL HTHP filter press cells. Each cell has a separate electronic temperature controller and two separate pressure regulators (drive pressure and back pressure). This allows each cell to be heated and pressurized…

Filter Press, HTHP, 175 mL, 4 Unit with Regulators & Temperature Controllers

Filter Press, HTHP, 500 mL, Single Capped Cell for Filter Paper, N2 Pressure

The HTHP (High Temperature, High Pressure) Filter Press is designed for testing drilling fluids and cement under elevated temperatures and pressures. This simulates various down-hole conditions and provides a reliable method for determining the effectiveness of the material being tested.

Filter Press, HTHP, 500 mL, Single Capped Cell for Filter Paper, N2 Pressure

Filter Press, Low Pressure, 6 Unit

Multi-Unit filter presses are perfect for lab environments when several tests must be run simultaneously. These units come complete with manifolds and all necessary air hoses and bleed-off valves. Suitable for laboratory use, Filter Presses have become the industry standard for low pressure/low…

Filter Press, Low Pressure, 6 Unit

Filter Press, Low Pressure, Bench Mount with Regulator & Hose

The low pressure filter press helps determine filtration and wall cake-building properties of drilling fluids. The filter press design features a cell body to hold the mud sample, a pressure inlet, and a base cap with screen and filter paper.

Filter Press, Low Pressure, Bench Mount with Regulator & Hose

Filter Press, Low Pressure, Wall Mount, Half Area with CO2 Pressure Assembly

The Half Area Filter Press, or Mini-press (140-60), consists of a modified low pressure regulator with a CO2 bulb pressurizing assembly and a filtration cell body. A rubber diaphragm boot contains the fluid and separates it from the pressurizing gas. This enables the unit to be operated while inverted,…

Filter Press, Low Pressure, Wall Mount, Half Area with CO2 Pressure Assembly

Filter Press, Low Pressure, Wall Mount, Model MB with CO2 Pressure Assembly

The Filter Press Model MB is a portable unit with a built-in CO2 pressure assembly with a regulator.  The cell is MB style, which means it turns and locks in place instead of using a clamp or locking screws.   Extremely portable May be operated by filtering upwards, which negate cutting settling…

Filter Press, Low Pressure, Wall Mount, Model MB with CO2 Pressure Assembly

Filters

Di-Corp currently has two Inline Disposable 0.45 Micron Filter options available — the high turbidity FHT-45 and the medium turbidity FMT-45, as well as one Inline Disposable 0.2 Micron Filter — the CAP300X2.

Filters

Fishing Tools & Taps

Di-Corp offers a wide variety of Fishing Tools and Recovery Taps in all sizes of Wire Line Drill Rod and Casing. Recovery taps are offered in both right and left hand threaded configurations.  

Fishing Tools & Taps

FLA-6

Earth Pro FLA-6 is a special blend of products designed to be an effective and economical oil well cement fluid loss additive. The product does contain some slurry dispersing properties, although it is recommended to combine Earth Pro FLA-6 with an effective cement dispersing agent to induce…

FLA-6

Foam Slayer

Earth Pro Foam Slayer is a versatile, low toxicity blend of products used to control foaming problems in a wide range of applications. It is very effective in low concentrations and is a more persistent defoamer than alternative defoaming/anti-foaming products. It is particularly…

Foam Slayer

FR 100

Earth Pro FR 100 is an anionic high molecular weight polyacrylamide supplied in easy to handle liquid emulsion form. It is a highly efficient friction reducer for water-based fracturing fluids, capable of reducing pressure losses due to friction by over 70%. Earth Pro FR 100 has been…

FR 200

Earth Pro FR 200 is an anionic high molecular weight polyacrylamide supplied in easy to handle liquid emulsion form. It is a highly efficient friction reducer for water-based fracturing fluids, capable of reducing pressure losses due to friction by over 70%. Earth Pro FR 200 has…

FR 300

Earth Pro FR 300 is an anionic high molecular weight polyacrylamide supplied in easy to handle liquid emulsion form. It is a highly efficient friction reducer for water-based fracturing fluids, capable of reducing pressure losses due to friction by over 70%. Earth Pro FR 300 has been…

FR 400

Earth Pro FR 400 is an anionic high molecular weight polyacrylamide supplied in easy to handle liquid emulsion form. It is a highly efficient friction reducer for water-based fracturing fluids, capable of reducing pressure losses due to friction by over 70%. Earth Pro FR 400 has been…

Frontier Kit

The Frontier Kit is a flexible and easy-to-use mud engineer's kit containing a modified Model 800 Viscometer with retractable legs, a Kit-Sized Full Area Filter Press, a Removable Retort, a Sand Content Kit, pH paper, and all reagents, glassware and supplies needed to run alkalinity, chloride, or hardness…

Frontier Kit

G-Stop

G-Stop is a polymer that will expand 300 times its volume in fresh water (50 times in salt water). This remarkable property makes it an excellent medium for plugging fissures and cracks encountered in drilling operations preventing the further loss of drilling fluid.

G-Stop

Gardner Denver and Emsco Mud Pump Parts

A Mud Pump is composed of many parts including mud pump liner, mud pump piston, modules, hydraulic seat pullers, and other parts. Di-Corp offers a full line of parts for mud pumps including various styles of liners, repair kits, rods, pistons, rubber kits, seat gravel and valve gravel. Duplex and…

Gardner Denver and Emsco Mud Pump Parts

Garrett Gas Train

The Garrett Gas Train is the most widely used portable instrument for the determination of soluble sulfides and carbonate concentrations in drilling fluid. Soluble sulfides include H2S and the sulfide (S-2) and bisulfide (HS-) ions. Total soluble carbonates include CO2 and the carbonate…

Garrett Gas Train

Geothermal Pipe & Loop Accessories

Geothermal heating & cooling uses the earth’s renewable energy, just below the surface, to heat or cool a home or other building, and to help provide hot water. At Di-Corp we can provide you with all sizes and configurations of Geothermal pipe and accessories for Closed-Loop and Open-Loop…

Geothermal Pipe & Loop Accessories

Gilsonite

Gilsonite is a naturally occurring hydrocarbon. It is mined and ground to the desired particle size. Gilsonite is used in drilling mud fluids and oil well cementing. Gilsonite, in a range of softening points and particle sizes, is a standard ingredient in oil-based drilling muds used in shales…

Gilsonite

Glass Beads (Medium and Fine)

Glass Beads are specially sized, solid glass spheres made of high-grade crown glass of the lime soda type. Glass Beads are chemically inert, free of impurities and non-polluting. Glass beads come in 2 sizes; Medium (50-80) where 95% pass through a 60 mesh screen and Fine (100-170) where 95% pass through…

Glass Beads (Medium and Fine)

Glassware

Di-Corp offers a range of Glassware. For the full range of products or to request a specific product please contact Di-Corp.  Example products include the following...  Part Number Description EN2905 Cylinder 50 mL Glass Grade TC EN3050 Cylinder 25 mL Polypro Grade EN5900 Glass…

Glassware

Glide Graph

Glide Graph is a highly resilient graphite bead with a very low coefficient of friction. It is inert and non-toxic. Glide Graph is an alternative to glass and plastic beads for torque and drag reduction. It is used in directional or crooked holes when torque and drag becomes a problem. Glide…

Graphite Powder

Graphite Powder has a greasy feel and very low coefficient of friction. Chemically, Graphite Powder is the pure form of carbon.  Graphite Powder is used as a torque reducer in directional or crooked holes when a water based mud system is being used. Torque reduction does not become significant…

Graphite Powder

Grout-Well and Grout-Well DF

Grout-Well and Grout-Well DF are one step bentonite grouting materials designed to achieve low permeability seals in water wells, monitor wells, geotechnical borings, and heat pump holes. They achieve a range of solids contents, 17% to 20% solids by weight. Grout-Well DF’s granular…

Grout-Well and Grout-Well DF

Guar Gum FHD

Guar Gum FHD is a fast hydrating guar with particle size of less than 200 mesh. Guar Gum FHD is compatible with fresh water and brines. It can be easily cross-linked with various borate salts and can be readily broken with hemicellulose enzyme and oxidative breakers. Guar Gum FHD provides…

Guar Gum FHD

Guar Gum HP 4501P

Guar Gum HP 4501P is used as a depressant where there is froth flotation and is specially blended for easy mixing. Best suited for potash floatation, Guar Gum HP 4501P depresses clays and slimes providing viscosity in fresh or brine water. 

Guar Gum HP 4501P

Hand Crank Rheometer

The Hand Crank Rheometer is a direct-indicating, manually-operated, rotational viscometer. It is powered by a hand crank, which drives the spindle through a precision gear train. The shift cam selects between fixed speeds of 300 and 600 RPM. A Knob on the hub of the shift cam determines gel strength.…

Hand Crank Rheometer

HDD Kit

The Horizontal Directional Drilling (HDD) Mud Kit contains a Shearometer to help an operator determine a drilling mud's ability to suspend cuttings. The HDD Mud Kit is executive styled and includes essential testing equipment for checking fluid Density, Viscosity, Sand %, and pH. A calculator is also…

HDD Kit

Heavy Duty 2 Part Clamps

Di-Corp offers Heavy Duty 2 Part Clamps in black or galvanized finishes for the Infrastructure industry in applications such as tailings ponds, civil construction, slurry wall, and dams. They are easy to install and come with heavy duty rubber liner as well as the necessary hardware. Heavy Duty 2 Part…

Heavy Duty 2 Part Clamps

High Density Polyethylene (HDPE)

High Density Tubing provides the best performance in deeper monitoring wells because of its rigidity. The stiffness of this material produces better flow rates and greater lifts. This tubing will also stretch much less than LDPE material in deeper monitoring wells making it more efficient. High Density…

High Density Polyethylene (HDPE)

High Flow Foot Valves

The High Flow System is designed to be used in 2 inch wells or larger where a high pumping rate is desired or where very deep wells are encountered. This system is also an excellent well development tool in 2 inch piezometers.  The High Flow System can provide lift of up to 250-300 feet in 2 inch…

High Flow Foot Valves

High pH Buffer

High pH Buffer is a blend of alkali that resists changes in pH both upwards and downwards. High pH Buffer is designed to control the pH of water based fracturing fluids in the range 8.0 to 10.0. This pH range is optimal for quick crosslinking of borate/guar systems and also allows…

Hoisting Plug Adaptor Subs

Hoisting Plug Adaptor Subs are available in all sizes to adapt your drill string to the Hoisting Plug. These subs have a bullnose pin profile and the threads have been machined to allow for full thread make-up by hand. These subs are machined from high quality alloy steel and depending on the size and…

Hoisting Plug Adaptor Subs

Hole Openers

A Hole Opener is a device used to enlarge the borehole during a well drilling operation. It can be positioned either above the drill bit or above a pilot run inside the existing borehole. Hole opener arms have to sustain heavy loads during operations and are generally…

Hole Openers

Hotset Cement

Earth Pro Hotset Cement is a thermally stable cement blend package designed specifically for use in wireline operations. It contains a combination of several additives developed to keep the cement slurry stable and in fluid form for the placement time necessary to set deep plugs at temperature…

Hotset Cement

HT Clay Stabilizer

HT Clay Stabilizer is a cationic organic multivalent clay inhibitor, which is 100% soluble in water.  HT Clay Stabilizer has been developed as an environmentally friendly clay inhibitor for water sensitive formations which maintains its effectiveness over a wide temperature range and…

HTHP Viscometer

When extremely high-temperature and/or high-pressure viscosity measurements are required, the HTHP Viscometer is the solution. This fully-automated system accurately determines the rheological properties of completion fluids and drilling fluids in terms of shear stress, shear rate, time, and temperature…

HTHP Viscometer

Humalite (Black Earth Powder)

Humalite is a naturally oxidized coal-like material similar to Leonardite (Lignite) but has a much higher humified organic matter content and significantly lower residuals. Humalite is used in water-based muds as a thinner (dispersant), and a secondary filtration control agent. It is…

Humalite (Black Earth Powder)

HW and HWT Casing

The Di-Corp Wire Line Casing offering includes the industry standard ‘W’ design in all sizes as well as the commonly used ‘WT’ design used in the larger diameter product. Carbon steel tubing, produced to the Di-Corp tubing specification ensures a tough, strong, straight,…

HW and HWT Casing

Hydrated Lime

Hydrated Lime or calcium hydroxide is a source of Ca and OH and is used to raise the pH. In clear water drilling, Hydrated Lime is added to the sump water to increase the pH and to provide calcium ions. In a Gyp-based mud system, Hydrated Lime is added at a concentration of 1.0 kg/m³,…

Hydrated Lime

Hydraulic Mud Mixer

A Hydraulic Mud Mixer is an essential tool of achieving the perfect balance of drilling additives and water to maximize the lubricating agents within the additives. This ensure that down the hole equipment is protected effectively.  Maximum Speed: 5200 RPM Maximum Pressure: 2000 PSI Displacement:…

Hydraulic Mud Mixer

HydraVis D

Earth Pro HydraVis D is a naturally derived polymer utilized to enhance hole cleaning and cuttings transport in both salt and fresh water environments. Earth Pro HydraVis D is a concentrated product that yields 8-10 times more volume pound for pound when compared to bentonite making Earth…

HydraVis D

HydraVis L

Earth Pro HydraVis L is a liquid suspension of natural polymer and is used for viscosifying in fresh, brackish and/or salt water. It is best suited where dry polymers can not be dispersed and hydrated easily. Earth Pro HydraVis L is generally used as a viscosifier but can also be used as a…

HydraVis L

Hydrocarbon Recovery EcoBailers

A Clear PVC Hydrocarbon Recovery EcoBailer is an eco-friendly product that is designed to help you remove the L.N.A.P.L, floating hydrocarbon product from your monitoring wells without removing water as well. The Hydrocarbon Recovery EcoBailer uses a specially designed ball which floats in water but…

Hydrocarbon Recovery EcoBailers

Hydrogel

For use in drilling operations where premium grade Wyoming Bentonite is desired. Hydrogel is a preferred product for use in oil and gas exploration drilling where API 13A Section 9 material is required. It is also used in slurry trenching, caisson boring, and cast-in-place concrete foundations. Hydrogel…

Hydrolift-2

The Hydrolift-2 is a portable, electrically operated device that is used to automate the operation of the Inertial Pump. The Hydrolift is powered by a 3/4 horsepower electric motor (available in either 110 volt or 220 volt) and generates a 4 inch stroke at up to 200 cycles per minute. The Hydrolift-2…

Hydrolift-2

Hyperdrill AD 855

Hyperdrill AD 855 is a 40% active hydrolized polyacrylamide in liquid form. It can be used as a flocculant to promote water clarification in clear water drilling, a foam stabilizer or it may be used in conjunction with K+ to stabilize shale. As a flocculant it is normally used in concentrations…

Hyperdrill AE 853

Hyperdrill AE 853 is a high molecular weight, medium charge, polyacrylamide supplied as a low viscosity emulsion. By design, it mixes easily and yields rapidly.

Hyperdrill AF 204RD

Hyperdrill AF 204RD is a water-soluble acrylamide co-polymer. It disperses readily in water minimizing the formation of fisheyes. Hyperdrill AF 204RD is an effective anionic polymer flocculant used for clear water drilling. It should be added through a chemical barrel at the flow line or injected…

Hyperdrill AF 204RD

Hyperdrill AF 207RD

Hyperdrill AF 207RD has been developed to give enhanced performance in conventional clear water or low solids drilling fluids while maintaining functionality in K+, polymer and high salt systems. With improved dispersibility over conventional PHPA powders, Hyperdrill AF 207RD provides all the benefits…

Hyperdrill AF 207RD

Hyperdrill AF 247RD

Hyperdrill AF 247RD has been developed to provide improved shale stabilization/inhibition in drilling fluids with minimal effect on rheology. It is suitable for use in fresh water, seawater, K+ polymer, and other inhibitive water-based systems. It’s improved rheological properties allow…

Hyperdrill AF 247RD

Hyperdrill CP 905H

Hyperdrill CP 905H is an effective cationic flocculant used for clear water drilling and fluid clarification in closed systems. It is very effective in dewatering water-based systems, especially those that contain significant amounts of potassium salts, biopolymers, and PAC’s. Hyperdrill…

Hyperdrill CP 905H

Hyperdrill CP 911

Hyperdrill CP 911 is an effective cationic flocculant used for clear water drilling and fluid clarification in closed systems. Hyperdrill CP 911 is very effective in dewatering water-based systems, especially those that contain significant amounts of potassium salts, biopolymers, and PAC’s.…

Hyperdrill CP 911

Industrial Moulding Plaster

Industrial Moulding Plaster is most widely used as a material to prepare thixotropic cement slurries. Depending upon the cement, the optimum concentration of Industrial Moulding Plaster varies from 8% to 12% BWOC. Industrial Moulding Plaster can also be used to develop freeze…

Industrial Moulding Plaster

Inline Centralizers

Centralizers are required for vertical surveys to prevent the tool from spinning. The design of inline centralizers prevents the tool from blocking when surveying open holes as the blades can deform to a minimum diameter of 38 mm. Inline centralizers are designed for the isRG38 running gear. They come…

Inline Centralizers

isAnalysis Software

Further analysis and data processing can be conducted using the isAnalysis software supplied with isCompass and isGyro. The isAnalysis software can be installed on any Microsoft Windows XP (64 and 32 bit), Windows 7 or Windows 8 system.  isAnalysis software allows users to visualize, edit, correct,…

isAnalysis Software

isCompass

The isCompass is a magnetic multishot instrument for borehole surveying based on modern MEMS technology. It is fully integrated in its own brass running gear, requiring little set-up in the field. Wireless in operation, the tool utilizes infrared communication with a rugged handheld field computer.…

isCompass

isGyro

The isGyro is a user-friendly borehole survey tool that offers you high accuracy in mining and geotechnical applications. Download and processing times are fast and the tool can survey for up to 16 hours on a single battery charge. No special pre-survey or post-survey procedures are necessary to get…

isGyro

ISRG38 Running Gear Kit

Di-Corp offers a 38 mm running gear especially designed for the isGyro which is compatible with surveying accessories. The isGyro 38-mm Gyro Running Gear Kit comes in a Peli Case 1750 and consists of a pressure barrel, a top plug with tool hanger, a bottom plug with shock absorber, swivel,…

ISRG38 Running Gear Kit

isSlimGyro

The isSlimGyro is the world's smallest rate gyro survey instrument. With a diameter of only 21.56 mm and a running gear diameter of 26 mm, it offers high accuracy in even the tightest holes. With an amazingly low power consumption of 0.2 W the isSlimGyro can survey for up to 75 hours on a single battery…

isSlimGyro

J Plugs

Di-Corp's heavy duty locking plugs are constructed of high impact ABS plastic and are precision machined to fit the inside diameter of PVC or steel wells. An expanding urethane gasket seals the well and protects it from contaminants. J Plugs are available in Schedule 40 and Schedule 80 as well as…

J Plugs

K-Packers

K-Packers are designed to provide a sand tight seal between the well screen and casing and are typically used on the top of telescope size screens in the water well, construction and environmental drilling industries. K-Packers eliminate contamination of underground water sources from intrusion of surface…

K-Packers

K2 Plus

Earth Pro K2 Plus is a chloride free, cationic organic multivalent clay inhibitor, which is 100% soluble in water. It has been developed as an effective chloride free clay inhibitor for water sensitive formations. Earth Pro K2 Plus has a small ionic radius allowing easy substitution on…

K2 Plus

Kleer-Kore Tubes

Kleer-Kore Tubes are rugged, resilient, transparent PVC tubes designed to allow accurate, visual insitu inspection of soft, stick or broken core. Kleer-Kore Tubes can be capped immediately to preserve moisture and allows transportation to your laboratories without disturbance and damage. …

Kleer-Kore Tubes

Kopr-Kote

Kopr-Kote Drill Collar Compound and Tool Joint Compound is an unleaded, premium quality compound containing copper flake, graphite, rust and corrosion inhibitors, antioxidants, and other natural extreme pressure and anti-wear additives. These are blended into Jet-Lube’s aluminum stearate…

Kopr-Kote

Kwik Klamps and Parts

The Kwik Klamp is the most popular tool used worldwide by well drillers, pump installers, well servicemen, and environmental drillers. The Kwik Klamp allows workers to bring pipe up to an easy working level. Kwik Klamp is available in three styles. Kwik Klamp 1 is for pipe sizes 1" -…

Kwik Klamps and Parts

Lever Pump

The Lever Pump was designed to provide operators with a convenient, portable mechanism which would provide some mechanical advantage when manually operating the Inertial Pump as well as facilitating the collection of samples with this system. This actuator will fasten onto most above ground well completions…

Lever Pump

Linseed Soap

Linseed Soap is a lubricating grease made from a mixture of linseed oil, fatty soaps and surfactants. It is a semi-solid paste, brown in color. Linseed Soap can be swabbed inside inner tubes, added to drill fluid through a suction hose applicator or flushed into holding tanks with a water…

Linseed Soap

LITE Wireline Drill Rod

When drill size and/or remote site mobilization becomes an issue, Di-Corp offers a lighter weight drill rod alternative in both deep hole and standard wireline thread forms.  Each stage of the process, from material selection to manufacturing, packaging and handling, is controlled and supported…

LITE Wireline Drill Rod

Locking Well Caps

Aluminum Locking Caps are ideal for monitoring wells providing a light weight material for easy handling, impervious to the elements with the aluminum construction and lockable to prevent vandalism. This are 2 piece caps. The bottom cap is held in place with set screws and the upper cap is secured with…

Locking Well Caps

Low Density Polyethylene (LDPE)

Low Density Tubing is the most popular tubing choice for use in shallow monitoring wells. LDPE tubing is more flexible than HDPE and is less likely to develop a kink. The difference in rigidity between LDPE and HDPE does not have a significant impact on the performance of the inertial pump in shallow…

Low Density Polyethylene (LDPE)

Low Flow Foot Valves

The Low Flow System is designed to be used in small diameter piezometers (usually 1.5" ID to 0.75" ID). It can provide flow rates of up to 1/2 gallon per minute and can lift water from up to 100 feet.  The Low Flow System D-13 and SS-13 valves have a male thread which allows them to have a maximum…

Low Flow Foot Valves

LTR

LTR can be used in cement slurries as either a dispersant in cement to increase compressive strength or as a retarder to delay the setting of the cement. LTR is effective with all Portland cements and generally added in concentrations from 0.1% and 2.5% by weight of cement. The sodium lignosulfonates…

LTR

Lubricity Tester

The EP and Lubricity Tester is a high-quality instrument used to measure the lubricating quality of drilling fluids, provide data to evaluate the type and quantity of lubricating additives that may be required, and predict wear rates of mechanical parts in known fluid systems. EP (Extreme Pressure Test)…

Lubricity Tester

Lynac Sampler

Heavy duty split tube Lynac Samplers is a heavy duty version of the standard split tube sampler. It is designed to better adapt to severe service under hard driving unlike the standard samplers. Coarse threads in the sampler head speeds assembly and disassembly and the shoe is heat treated to withstand…

Lynac Sampler

Magma Fiber

Magma Fiber is a specially formulated acid soluble, extrusion spun mineral fiber for lost circulation problems. It is 97.3% soluble in a 7.5% HCL acid. It is a spun mineral fiber, which acts as a plugging and bridging agent to plug voids, fractures, and all types of permeable formations. Magma…

Magma Fiber

Magnafloc 430 / Zetag 7692

Magnafloc 430 / Zetag 7692 is an effective cationic flocculant used for clear water drilling and fluid clarification in closed systems. Magnafloc 430 / Zetag 7692 is very effective in dewatering water-based systems, especially those that contain significant amounts of potassium salts, biopolymers,…

Magnesium Oxide

Magnesium Oxide can be used as a substitute for lime as a coagulant in clear water drilling and for alkalinity control in polymer systems where a high pH (above 11.0) is undesirable.  Any undissolved excess Magnesium Oxide will continue to dissolve at a slow rate to maintain a constant pH level…

Magnesium Oxide

Manholes

A Manhole is the top opening to an underground utility vault used to house an access point for making connections or performing maintenance on underground and buried public utility and other services including sewers, telephone, electricity, storm drains and gas. Di-Corp offers a variety of Manholes…

Manholes

Margo Plugs

The Margo Plug is arranged in single and double pack designs in various lengths. It is mechanically operated from outside the hole, and is generally used for controlling water flows from drill holes. The Margo Plug is inserted into the collar of the hole and the rubbers are expanded by simply tightening…

Margo Plugs

Marsh Funnel

Viscosity and gel strengths are measurements that relate to the flow properties of fluids. The Marsh Funnel Viscometer has been used for many years to obtain an indication of the relative viscosity of drilling fluids. It is calibrated to outflow one quart (946 mL) of fresh water at a temperature of…

Marsh Funnel

Measuring Cup, 1000 mL, Plastic

Measuring Cup is graduated in fluid ounces (2 - 32 oz) and cubic centimeters (100 - 1,000 cc) and is designed to be used with the Marsh Funnel Viscometer. The heavy duty plastic measuring cup features a double spout and has the two scales molded into the inside of the cup for convenience. Size: 5.75"…

Measuring Cup, 1000 mL, Plastic

METEOR Kit

The Mud Engineer's Testing Equipment on Rollers (METEOR) Kit contains all the equipment you'll need to conduct tests on water and oil-based muds (with the optional ES Meter) - all in one waterproof, portable case! In addition to the standard mud balance, marsh funnel, and cup, the METEOR Kit includes…

METEOR Kit

Methylene Blue Test Kit

Optimized drilling fluid control requires that some measurement be made to give information about the nature and types of clays that are present in the drilling fluid. The same information is also required about the types of clays and shales that are being drilled, since they become a part of the fluid…

Methylene Blue Test Kit

Metso 66

Metso 66 is a cement pre-flush additive designed specifically for the removal of oil-related drilling fluids from the wellbore. This silicate-based material contains a superior detergent package which quickly breaks down and emulsifies oil-muds for rapid and complete cleanup. Secondly, Metso 66…

Metso 66

Micro Flow Foot Valves

The Micro Flow System is popular for use in direct push technology micro well installations and multi-level installations. The SS-10 foot valve can deliver a sample from as deep as 75 feet and flow rates with this system are usually less than 1/2 gallon per minute.  This system consists of a small…

Micro Flow Foot Valves

Micro-Gel

Micro-Gel is a bentonite product designed and engineered for micro-tunneling and tunneling applications. It is engineered to promote low fluid loss and increased lubricity, which translates to low jacking pressures. The integrity of the tunnel wall is maintained by the effect of the superior filter…

Micro-Gel

Microfine Cement

Microfine Cement is an ultra fine, high sulfate resistant cementitious product. Having an average particle size of 2-4 microns and surface area of >15000 cm²/gram, it is an ideal candidate for sealing micro-annular pore spaces under a wide variety of wellbore conditions. Due to the very…

Microspheres

Microspheres are ceramic hollow microspheres with a shell composition of aluminosilicate and are filled with a gas mixture of CO2 and N2.  Microspheres are used to reduce slurry density to as low as 1,000 kg/m³. These lightweight slurries are typically used in areas with low fracture gradients…

Microspheres

Miscellaneous Sand & Gravel

Di-Corp offers a range of Miscellaneous Sand & Gravel including Filter Sand, Mesh Sand, Pea Gravel, Filter Gravel, Frac Sand, Well Gravel, and Geothermal Silica Sand. All sands and gravels come in various grades and are used in a wide variety of applications. Please contact us for further details…

Miscellaneous Sand & Gravel

Model 1100 Viscometer

Model 1100 Viscometer is a fully-automated system that accurately determines the fluid characteristics of stimulation fluids, completion fluids, drilling fluids, and cement in terms of shear stress, shear rate, time, and temperature at pressure up to 2,500 PSI. Using the exclusive ORCADA software, a…

Model 1100 Viscometer

Model 130 HTHP Benchtop Consistometer

The Model 130 Benchtop Consistometer was specifically engineered to determine the thickening time of well cements under simulated down-hole pressures and temperatures. Its compact, lightweight design makes the unit ideally suited for benchtop use. Pressure is generated via an air-driven hydraulic pump…

Model 130 HTHP Benchtop Consistometer

Model 20 Constant Speed Blender for Fracturing Fluids, 1 Liter

The Model 20 Constant Speed Blender, 1 liter, facilitates the preparation of oil well cements and fracturing fluids for testing according to API guidelines. It also provides a means of consistently preparing fracturing fluids for testing. The optional Torque Monitoring Module evaluates the hydration…

Model 20 Constant Speed Blender for Fracturing Fluids, 1 Liter

Model 2025 Automated HTHP Consistometer

The Model 2025 Automated HTHP Consistometer was specifically engineered to determine the thickening time of well cements under simulated down-hole pressures and temperatures. The HTHP Consistometer offers a computerized Data Acquisition and Control system, automatic temperature and pressure control,…

Model 2025 Automated HTHP Consistometer

Model 2040 Automated HTHP Consistometer

The Model 2040 Automated HTHP Consistometer was specifically engineered to determine the thickening time of well cements under simulated down-hole pressures and temperatures. The Model 2040 offers a computerized Data Acquisition and Control system, automatic temperature and pressure control, and a variable…

Model 2040 Automated HTHP Consistometer

Model 60 Atmospheric Consistometer

The Model 60 Atmospheric Consistometer is used for conditioning cement slurries as specified within API Specification 10. Determination of rheological properties, examination of free water content, and valuation of the API fluid loss test all require that the cement slurry be pre-conditioned by an Atmospheric…

Model 60 Atmospheric Consistometer

Model 800 Viscometer

The Model 800 8-Speed Electronic Viscometer is extensively used worldwide in both the field and laboratory for the precise measurement of Rheological properties of fluids.

Model 800 Viscometer

Model 900 Viscometer

The Model 900 Viscometer is a true Couette coaxial cylinder rotational viscometer, which employs a transducer to measure the induced angle of rotation of the bob by a fluid sample. For a fully automated Control/Data Acquisition System suitable for research applications, the Model 900 Viscometer may…

Model 900 Viscometer

Modified Starch

Modified Starch is a highly derivatized polysaccharide specifically developed as a filtration control additive for drilling and completion fluids. The product was developed to meet the more stringent Canadian market requirements.

Modified Starch

Monuments & Casing Protectors

Monuments & Steel Casing Protectors are quality machined to avoid possible damage to an installed well. The lockable protectors have aluminum locking caps to avoid any contamination to the well. Di-Corp offers a range of Monuments & Casing Protectors and well covers for various well sizes. Please…

Monuments & Casing Protectors

Mud Balance, 4 Scale, Metal

The 4-scale Metal Mud Balance features a Computer Numerically Controlled (CNC) all-machined manufacturing process, instead of the old die-cast molded method which has been utilized for years. This uniform method of construction results in a much stronger, more rugged instrument that sets the industry…

Mud Balance, 4 Scale, Metal

Mud Pump Parts

A Mud Pump is composed of many parts including mud pump liner, mud pump piston, modules, hydraulic seat pullers, and other parts.  Di-Corp offers a full line of parts for Mud Pumps including various styles of liners, repair kits, rods, pistons, rubber kits, seat gravel and valve gravel.

Mud Pump Parts

Mud Terminator

Eliminate the high cost and difficulty of disposing drilling fluids with Earth Pro Mud Terminator. It consists of a proprietary blend of super absorbent polymer, absorbent minerals. The material is non-hazardous, chemically inert (won’t react with anything), non-dusty and absorbs very quickly. It…

Mud Terminator

MultiMix

Earth Pro MultiMix is a dry blend of specially engineered synthetic polymers designed to flexibly bond loose ground and improve wellbore stability in difficult drilling situations. It is used to penetrate unconsolidated formations and then fully hydrate to form a sort of polymer glue holding formation…

MultiMix

Myacide GA25

This product is a registered biocide under Agriculture Canada's "Pest Control Products Act". (Registration#28339).  Myacide GA25 is a glutaraldehyde-based biocide in a clear liquid form. Myacide GA25 is effective in controlling both aerobic and anaerobic (sulfate reducing) bacteria.  It is…

Naturalgel

Naturalgel has the unusual property of expanding several times its original volume when placed in water. The result is higher fluid viscosity, gel strength, and solids suspending ability.  

Naturalgel

Nikal Thread Lube

Nikal Thread Lube is a premium quality anti-seize and gasket compound for use in extreme temperatures and hostile environments. Nikal Thread Lube contains pure nickel flake and a nearly inert dispersing solid in a high quality aluminum complex base grease which provides unsurpassed protection…

Nikal Thread Lube

NW - Casing

The Di-Corp Wire Line Casing offering includes the industry standard ‘W’ design in all sizes as well as the commonly used ‘WT’ design used in the larger diameter product. Carbon steel tubing, produced to the Di-Corp tubing specification ensures a tough, strong, straight,…

NW - Casing

Offshore Test Kit, Basic

The Offshore Kit is a popular, basic mud engineer’s kit containing a Sand Content Kit, pH paper, and all reagents to run alkalinity, chloride, or hardness analysis. All necessary glassware and equipment are included, and space is available for a retort and rheometer (115 Volt or 230 Volt). Please…

Offshore Test Kit, Basic

OGC-60

OGC-60 is used to shorten the set time and improve expansion of portland cements. It is widely used in the preparation of thixotropic cements where high early strength cement is required, especially where gas migration is a problem. Thixotropic cements are used widely in shallow…

Oil Sorbent Mats

In today’s industrial environment nothing moves without oil. It is one of the most important sources of energy, a common lubricant and a starting point for many modem materials. Whenever oil is stored, transported or processed, there is always the potential danger of a spill. Be it on land…

Oil Sorbent Mats

Oilgel 3000

Oilgel 3000 is a modified bentonite clay, capable of producing high YP/PV ratios and gel strengths in diesel oil, crude oil and mineral oils with or without a polar activator. Oilgel 3000 is an effective viscosifier in oil and invert emulsion systems. As a viscosifier in oil, Oilgel 3000 eliminates…

Oilgel 3000

Oilwell 'G' Cement

Earth Pro Oilwell ‘G’ Cement is manufactured according to very strict API (American Petroleum Institute) guidelines with respect to setting time, compressive strength, free water content, and other physical and chemical factors, to assure a consistent product suited for the high demands…

Oilwell 'G' Cement

Oilwet

Earth Pro Oilwet is a blend of low HLB surfactants used as an oil-wetting agent. It is designed to be used as an oil-wetting agent in any oil mud system. It is a surfactant blend, which improves oil-wetting properties of oil mud systems. For best performance it should always be used in…

OMD

Earth Pro OMD is designed to disperse solids in oil-based drilling fluids when the solids content of the fluid adversely affects the rheology. It is suitable for use in all oil-based drilling fluids that contain large amounts of drill solids and its addition does not adversely affect the emulsion…

Overshot Assemblies

The Edge-Lock Overshot is a simple, self-locking, compatible solution to retrieving the Inner Tube Assembly efficiently and reliably. When drilling down holes, the unique Edge-Lock mechanism housed within the Overshot Head ensures that the lifting dogs are physically unable to release the spearhead…

Overshot Assemblies

Overshot Assemblies - Rolling

The Rolling Edge-Lock Overshot is a modified version of the standard Edge-Lock Overshot. It is normally used when the hole angle approaches 45° and the overshot descent time is compromised by friction between the Overshot Assembly and the inside diameter of the drill string.

Overshot Assemblies - Rolling

Overshot Spares

Overshot Spares include all of the most commonly consumed Overshot wear components. The Edge-Lock Overshot spares kits contain Pins, Bearings, Springs, Nuts, Fittings, Pin Links & Screws as well as Lifting Dogs. The Pump-In Overshot spares kits contain the same items less the Edge-Lock components…

Overshot Spares

PCD Quadlatch Bits

PCD Drill Bits deliver premium performance and durability for a wide range of standard drilling applications within the Mineral Exploration, Geotechnical & Environmental and Oil Sands Coring industries. These matrix- and steel-bodied bits incorporate the latest cutter technology, computational…

PCD Quadlatch Bits

PCF-2

PCF-2 is designed primarily for down-hole gas encapsulation purposes. It contains a surfactant impregnated on a solid substrate, and coated to off-set the generation of any substantial foam until the cement slurry has been placed in the wellbore. This characteristic enables PCF-2 to be dry-blended…

pH Down Citric

Earth Pro pH Down Citric is often incorporated into acid formulations. Its function is to prevent the precipitation of gelatinous ferric hydroxide as the acid spends. As a sequestering agent, citric acid can hold as much as 3000 mg/l of ferric iron in spent acid solutions for more…

pH Down Citric

pH Up Soda Ash

Sodium Carbonate anhydrous commonly known as Soda Ash, is a chemical compound used widely in the drilling industry as a water based mud conditioner and contaminant treatment additive.  Earth Pro pH Up Soda Ash is used to precipitate calcium in make up water, which softens the water and elevates…

pH Up Soda Ash

Pitless Adapters

In the past, a well pit was used to provide a frost-free connection between the distribution line and the drop pipe of a submersible pump in a small diameter well.  This type of construction is not recommend as it has several disadvantages including being a potential danger to children, frequently…

Pitless Adapters

Plastic Ware

Di-Corp offers a range of Plastic Ware. For the full range of products or to request a specific product please contact Di-Corp.  Example products include the following...  Part Number Description EN3050 Cylinder 25 mL Polypro Grade EN5950 Plastic Pipette 1 mL  EX1460 Wash…

Plastic Ware

Plug Sand

Plug Sand is a specifically-graded 8/16 mesh sub-rounded sand used primarily as a temporary plugging or diverting agent in oilfield work-over applications. The semi-rounded nature of the particles will not contribute substantially to a densely packed matrix after placement, which will allow nominal…

Plug Sand

Plugz-It Max

Plugz-It Max is a lost circulation material designed to mix and pump with a drilling fluid into cobble, gravel, or fractured zones to restore mud circulation. It readily seals off coarse gravels, fractured formations, and other profiles where mud-loss is a problem. Plugz-It Max can be placed…

Plugz-It Max

Poly-Pro

Poly-Pro is a 100% active, dry granular polymer that disperses readily, resulting in easy mixing without lumps or fisheyes. Poly-Pro is used in horizontal directional drilling (HDD), water well drilling, slurry wall trenching and auger drilling. Poly-Pro’s high viscosity with minimal yield…

Poly-Pro

Poly-Xan

Earth Pro Poly-Xan a high molecular weight biopolymer of Xanthan Gum. It is used primarily as a viscosifier in fresh water, seawater or saline muds. It also provides a measure of filtration control. Earth Pro Poly-Xan (in conjunction with an oxygen scavenger) is temperature stable to…

Poly-Xan

Poly-Xan L

Earth Pro Poly-Xan L is a high molecular weight biopolymer of Xanthan Gum in liquid form. Used primarily as a viscosifier in fresh water, seawater or saline muds. Earth Pro Poly-Xan L is used primarily as a viscosifier in fresh water, seawater or saline muds. It also provides a measure of filtration…

Poly-Xan L

Portland Cement

Portland Cement is a high quality, cost-effective basic cement used in Mineral Exploration, Geotechnical & Environmental, HDD, Oil Sands Coring and Water Well drilling applications.  Portland Cement meets or exceeds all applicable chemical and physical requirements of ASTM C 150 and CSA A3000-03…

Potash for Cementing & Fracturing

Potash is commonly known as potassium chloride (KCl) or Muriate of Potash. Cementing When salt is blended into cement it is referred to as “salt cement”. Although sodium chloride is the more common salt, potassium chloride can be used to protect a particular sensitive clay sensitive formation.…

Potash for Cementing & Fracturing

Potash for Oilfield

Potash (KCl) is an odorless white crystal, which forms a neutral salt solution with water. Potash purity is expressed as percent K2O. Generally used to provide potassium (K+) ions in shale inhibiting drilling muds. The K+ ion provides a strong bonding ion between the clay platelets thus inhibiting the…

Potash for Oilfield

PowerPack PP1

The PowerPack PP1 provides the mechanical actuation for pumping with inertial pumps to depths of over 60 m, in a fully portable, single operator power unit. At 13 kg, the PowerPack PP1 provides outstanding pumping performance.  The PowerPack PP1 is powerful enough to lift water from over 60…

PowerPack PP1

PowerPump 2

The PowerPump 2 has a Honda GX100, 3 horsepower, 4 stroke, gasoline motor which powers this device. This actuator generates a 6 inch stroke and can operate both the Standard Flow System and High Flow System to their maximum effective depths. The PowerPump 2 weighs 70 pounds and usually requires two…

PowerPump 2

Pressurized Fluid Density Scale

Drilling fluids and cement slurries often have a considerable amount of entrained or trapped air that may give erroneous results when determining fluid density using conventional equipment. This air volume may be reduced or eliminated by pressurizing the sample cup, which will then give more accurate…

Pressurized Fluid Density Scale

Prima-Seal (Medium and Coarse)

Prima-Seal is a blend of lost circulation materials specifically formulated to cover a wide range of situations common in the occurrence of lost circulation. The two grades, Medium, and Coarse, contain a blend of granules and fibers, which act as bridging and sealing agents.

Prima-Seal (Medium and Coarse)

Processed Lime

Processed Lime is Calcium Oxide (CaO) sometimes referred to as quicklime or hotlime. The presence of calcium in cement is a well-known cement accelerator. The combination of the calcium present in Processed Lime and its reactivity characteristics when mixed with water produces a very…

Processed Lime

ProPac D

Earth Pro ProPac D is a 100% active dry natural based polymer that is used to control fluid loss and enhance filter cakes. It can also be used as a high shear rate viscosity modifier or lubricant. Common usage of Earth Pro ProPac D is in Horizontal Directional Drilling, Mineral Exploration and…

ProPac D

PVC Caps & Points

Di-Corp offers a range of Caps and Points for Geotechnical & Environmental drilling applications including PVC Sandpoints, PVC Slip Caps, and PVC Threaded caps. All caps and points are manufactured to Schedule 40 or Schedule 80 specifications. Contact for more information on these products. 

PVC Caps & Points

PVC Casing

Di-Corp’s Water Well PVC Casing is the industry leading choice for PVC Cased Water Wells. Our Engineered Buttress Thread has been designed with real world drilling conditions in mind and with an emphasis on what the drill contractor may encounter while drilling a well. By designing a stronger…

PVC Casing

PVC Environmental Pipe

The quality of our products is of the highest importance. Our strict adherence to ASTM and industry standards guarantee quality in every product. All of our PVC pipe products are fabricated from Type 1, Grade 1 PVC and are manufactured to applicable ASTM and NSF standards. All threading is performed…

PVC Environmental Pipe

PVC Prepack

Prepacked screens consist of a standard, slotted PVC well screen pope surrounded by a stainless steel mesh. Sand is packed between the slotted PVC and the stainless steel mesh. Since the sand is packed around the slotted PVC before the well screen is installed, using prepacks guarantees that sand will…

PVC Prepack

PVC Transition Fittings

PVC Transition Fittings are used as a threaded coupling to enable you to go from Di-Corp’s Engineered Buttress Threaded Water Well casing to any telescopic stainless steel screen with an NPT thread. PVC Transition Fittings are available in various sizes. Please contact us for further size requirements.

PVC Transition Fittings

PW and PWT Casing

The Di-Corp Wire Line Casing offering includes the industry standard ‘W’ design in all sizes as well as the commonly used ‘WT’ design used in the larger diameter product. Carbon steel tubing, produced to the Di-Corp tubing specification ensures a tough, strong, straight,…

PW and PWT Casing

Quadlatch Core Barrel Overshot Assembly

The Quadlatch Core Barrel Assembly is complemented with a Quadlatch Core Barrel Overshot Assembly that consists of a ratchet step mechanism that allows for several latch attempts with one single tool cocking. Contact us for more information on Quadlatch Core Barrel Assemblies or Quadlatch…

Quadlatch Core Barrel Overshot Assembly

Reagents

Di-Corp offers a range of Reagents. For the full range of products or to request a specific product please contact Di-Corp. Example products include the following... Part Number Description EY1020 Hardness Buffer - Calcium Buffer (60 mL) EY1030 Hardness Indicator - Calcium Indicator (60 mL) EY1140 Potassium…

Reagents

Reaming Shells

A Reaming Shell typically sits just above the drill bit and helps maintain hole diameter, reducing the possibility of stuck tubes down the hole. It also acts as a stabilizer for the drill string at the bottom of the hole to prevent vibrations during drilling. The recommended practice is to alternate…

Reaming Shells

Recovery Tap Adaptor Subs

Recovery Tap Adaptor Subs are available in all sizes to adapt your drill string or casing thread to a Recovery Tap. These subs are machined from high quality alloy steel and depending on the size and thread configuration, may be heat treated and/or identified with special geometries. Di-Corp offers…

Recovery Tap Adaptor Subs

Red Dye for Cementing

Earth Pro Red Dye is a synthetic iron oxide pigment used to color cement or water based fluids. Oilfield Cementing Colorant: Earth Pro Red is a water dispersible pigment, which can be used as an indicator for determining the pre-flush/cement interface when cementing oilfield casing. Typical…

Red Dye for Cementing

Red Dye for Oilfield

Earth Pro Red Dye is a synthetic iron oxide pigment used to color cement or water based fluids. Oilfield Cementing Colorant: Earth Pro Red Dye is a water dispersible pigment, which can be used as an indicator for determining the pre-flush/cement interface when cementing oilfield casing. Typical…

Red Dye for Oilfield

ResinBond Cement

Earth Pro ResinBond Cement is a unique blend of high quality gypsum and polymeric resin designed specifically for the wireline industry. Combined with RB Catalyst, Earth Pro ResinBond Cement can be tailored to meet a wide variety of down-hole temperatures, providing extended working (open)…

ResinBond Cement

Retort Kit, 10 mL

The Retort provides a method for measuring the percentage (%) of oil and water, and for estimating both suspended and dissolved solids contained in a sample of water-based or oil-based muds and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when…

Retort Kit, 10 mL

Retort Kit, 20 mL

The Retort measures the percentage (%) of oil, water, and solids in a drilling fluid or wastewater sample. This information is important for controlling fluid rheology, density, and filtration characteristics. In a typical test, the retort heats a known volume of fluid past the boiling point. As the…

Retort Kit, 20 mL

Retort Kit, 20 mL with Electronic Temperature Control

The Retort provides a method for measuring the percentage (%) of oil and water, and for estimating both suspended and dissolved solids contained in a sample of water-based or oil-based muds and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when…

Retort Kit, 20 mL with Electronic Temperature Control

Retort Kit, 50 mL

The Retort provides a method for measuring the percentage (%) of oil and water, and for estimating both suspended and dissolved solids contained in a sample of water-based or oil-based muds and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when…

Retort Kit, 50 mL

Retort Kit, 50 mL with Electronic Temperature Control

The Retort provides a method for measuring the percentage (%) of oil and water, and for estimating both suspended and dissolved solids contained in a sample of water-based or oil-based muds and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when…

Retort Kit, 50 mL with Electronic Temperature Control

Retort, Removable

The Retort provides a method for measuring the percentage (%) of oil and water, and for estimating both suspended and dissolved solids contained in a sample of water-based or oil-based muds and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when…

Retort, Removable

Reverse Flank Wireline Drill Rod

Manufactured to the highest standards of quality and precision, Di-Corp offers a reverse flank threaded wireline drill rod solution (R) in Standard and LITE that improves your bottom line and increases your competitiveness. Each stage of the process, from material selection to manufacturing, packaging…

Reverse Flank Wireline Drill Rod

Rig Laboratory

Included in the Rig Laboratory are a mud balance, marsh funnel, measuring cup, filter press, sand content kit, timer, and all the reagents and labware for performing chloride ion analysis. An air hose and connections are included to run the filter press from rig air. Due to its design, this kit can…

Rig Laboratory

RockBond

Earth Pro RockBond can be thought of as powdered pavement for unstable wellbores, suitable to use in all water based drilling fluid systems. Earth Pro RockBond is a treated blend of very fine ground natural occurring high melting point hydrocarbon resins. It is used to control sloughing formation…

RockBond

Rod Gauges

Di-Corp Rod & Bit Gauges ensure that your gear is operating within it’s service life, optimizing productivity and safety. Many Drillers choose to use our gauges as a fail safe on-site checking mechanism which decreases potential downtime due to normal product wear and/or failure.

Rod Gauges

Rod Shoes

Di-Corp offers two versions of Rod Shoes to be used with drill rod if used to case a hole. Level 1 (T11) is a general purpose Rod Shoe suited for most drilling conditions through overburden. Level 2 (T12) is a premium shoe for more difficult overburden drilling conditions for improved life with increased…

Rod Shoes

Rod to Casing Adaptor Subs

Rod to Casing Adaptor Subs are available in all sizes to adapt your drill string thread to a casing thread. The inside diameter of these subs is based on the standard diameter of the smaller of the Rod or Casing size. The outside diameter of these subs is based on the standard diameter of the larger…

Rod to Casing Adaptor Subs

Rod to Rod Adaptor Subs

Rod to Rod Adaptor Subs are available in all sizes to adapt your drill string thread to another drill rod thread. The inside diameter of these subs is based on the standard diameter of the smaller of the Rod sizes. The outside diameter of these subs is based on the standard diameter of the larger of…

Rod to Rod Adaptor Subs

Rod Wipers

Rod Wipers help clean excess dirt and mud from rods before and after use. Rod Wipers are placed under the probe so when the rod string is retracted, the rubber wipers wipe away mud and dirt from the rod. 

Rod Wipers

Rotary Bits

Jentech (a division of Di-Corp) stocks a large selection of drill bits on the shelf both new and re-run tricone bits. They stock bits of all sizes and cutting structures including Rotary Bits. From TCI button bits to Steel tooth or Drag bits they can recommend the right bit for you and provide the quality…

Rotary Bits

Rubber Crumb (Coarse, Medium and Fine)

A lost circulation material made up of vulcanized rubber ground to a –20 mesh (F) 10-20 mesh (M) and a 3.5/16 mesh (C) size. Rubber Crumb is used as a seepage loss, and lost circulation material and bridging agent for all drilling fluids systems. Rubber Crumb is chemically inert and…

Rubber Crumb (Coarse, Medium and Fine)

Saf-Kote

Saf-Kote adsorbs onto metal surfaces. It is effective in all water-based, oil based and foam drilling fluids. Saf-Kote protects the drill string, casing and rig equipment against hydrogen sulfide (H2S), carbon dioxide or oxygen corrosion by physically adsorbing to metal surfaces. NOTE: Due…

Safety Plugs

Safety plugs are primarily used to plug a diamond drill hole. Safety plugs are designed to be installed at the required depth in the hole. The slotted nut (along with the adapter) is used to hold the plug in place while descending the hole to the required depth, offering more control. The…

Safety Plugs

Salt (Fine and #8 Coarse)

Salt is the common name for granular sodium chloride (NaCl). Available in two mesh sizes depending on application. Stimulation  Salt is often used as a diverting agent for acid stimulation. A broad spectrum of particle sizes can also be used including large particles that will bridge…

Salt (Fine and #8 Coarse)

SaltVis L

Earth Pro SaltVis L is a liquid emulsion synthetic polymer that is specifically designed to hydrate to its maximum ability in salt, brackish or any raised salinity source water.

SaltVis L

Sand Content Kit

One of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The Sand Content Kit determines the volume percent of sand-sized particles in the drilling fluid. API defines sand-sized…

Sand Content Kit

Sand Stabilizer

Sand Stabilizer is a dry blend of specially engineered synthetic polymers designed to flexibly bond loose ground and improve wellbore stability in difficult drilling situations. It can be used as a complete solution for broken ground or loose over burden drilling. The unique blend of polymers when mixed…

SAPP

SAPP (Sodium Acid Pyrophosphate) (Na2H2P2O7) is widely used in industrial processes as a cleaner and dispersant. SAPP is used as a strong deflocculant (thinner) in fresh water mud systems. It is commonly used in the dispersion of mud rings when water drilling and as a rapid thinner prior to cementing…

SAPP

Sawdust

Di-Corp Sawdust comes from clean, untreated, kiln-dried wood, with the moisture content typically running between 5-12%. Sawdust is the most economical and readily available lost circulation material choice for mud engineers and is the preferred product for use as an absorbent and deck clean-up on drilling…

Sawdust

Sea Mud

Sea Mud is a hydrous magnesium silicate (sepiolite), which meets the specifications as set down in the API Standards Specification 13A, Sec. 4. It is chemically referred to as anhydrous magnesium silicate also commonly known as Sepiolite clay or Salt Gel. Sea Mud can be used as a viscosifier in…

Sea Mud

Shale Traps

Shale Traps are constructed of neoprene rubber for elasticity and strength. Shale Traps are designed to support a grout column above the producing zone to seal between the casing and the bore hole when grouting. Available in soft or hard rubber and comes standard with stainless steel clamp.

Shale Traps

Shelby Tubes

Shelby tubes are thin-walled, hollow steel tubes, which are driven into the ground to extract a relatively undisturbed soil sample for use in laboratory tests used to determine density, permeability, compressibility and strength.  Each tube has one end that is chamfered to form a cutting edge and…

Shelby Tubes

Sighting Device Kit

A sighting device is required for vertical surveys to align with a known reference direction. The Polymetra sighting device for the isGyro is stored in a Peli Case 1400. It consists of a rifle scope mounted on a special bracket holding 3 spirit levels, clamp (can be attached to any spanner face of the…

Sighting Device Kit

Silica Flour

Silica Flour is powdered sand that inhibits strength retrogression in oil-well cements at elevated temperatures. As a cement extender it prevents cement sedimentation by increasing low shear viscosity. Silica Flour adjusts the phase transformation of cement-water mixture that occurs at high temperature…

Silica Fume (Densified)

Silica Fume (Densified) is a silicon dioxide that has undergone the densification process. Silica Fume (Densified) is a pozzolanic material used to improve the strength of cements. Reacting with the hydration products of portland cement, it forms a calcium silicate hydrate matrix which yields…

Silica Fume (Densified)

Silica Fume (Undensified)

Silica Fume (Undensified) is a by-product of the production of silicon metal. It is a pozzolanic material used to improve the strength of cements. Reacting with the hydration products of portland cement, it forms a calcium silicate hydrate matrix which yields a light weight high compressive…

Silica Fume (Undensified)

Silica Sand

Silica Sand is one of the most common varieties of sand found in the world. Silica Sand is suitable for many rapid, slow and pressure filtration systems. The raw materials are dried to sterilize the particles before proceeding with the sizing process. With the wide range of screen sizes available…

Silica Sand

Single Spindle Mixer

The Single Spindle Mixer is a Hamilton Beach HMD200 with a stainless steel cup included available in 115 or 230 volt.  It has three speeds and a cup rest for hands-free operation. The Single Spindle Mixer mixes up to twice as fast with more powerful 1/3 Hp motors and has minimized motor vibration…

Single Spindle Mixer

Slope Inclinometer Casing

Slope Inclinometer Casing is a special purpose pipe used in inclinometer installations. It maintains access for the inclinometer probe, allowing it to obtain subsurface measurements as well as controls the orientation of the probe via internal grooves. Slope Inclinometer Casing also conforms to movement…

Slope Inclinometer Casing

Slurry Master

Oilfield Cementing: Typical dosage in field applications is 0.5-2 L/m³ of cement slurry, depending on the severity of the foaming problem and slurry viscosity. Optimally, this product should be applied at a constant rate throughout the cement job, but slug applications for quick…

Slurry Master

Soap Stick FS-16

The main application of Soap Stick FS-16 is for the reduction of mud rings, bit balling and cake build-up on drill strings. Soap Stick FS-16 is most effective by dropping them down the drill pipe on connections as needed. It will start dissolving immediately on contact with the water in the…

Soap Stick FS-16

Soda Ash for Cementing

Soda Ash is the common name for anhydrous Sodium carbonate (Na2CO3). Soda Ash can be used as a chemical admixture for portland cement. When the dosage is low, Soda Ash can be uses as an accelerator of cement hydration, but acts as a retarder when the dosage is high. 

Soda Ash for Cementing

Soda Ash for Non-Oilfield

Sodium Carbonate anhydrous commonly known as Soda Ash, is a chemcial compound used widely in the drilling industry as a water based mud conditioner and contaminant treatment additive. 

Soda Ash for Non-Oilfield

Soda Ash for Oilfield

Sodium Carbonate anhydrous (Na2CO3) commonly known as Soda Ash, is a chemical compound of 99.7% purity. Soda Ash is used to precipitate calcium in make-up water or while drilling anhydrite stringers. Provided the saturation level of the calcium salt has not been exceeded, the amount of Soda Ash…

Soda Ash for Oilfield

Sodium Bicarbonate

Sodium Bicarbonate (NaHC03) is commonly known as Bi-Carb, Baking Soda or Bicarbonate of Soda. Sodium Bicarbonate is most commonly used for treating cement contamination by precipitating the calcium as calcium carbonate and reducing the pH. The available H+ ion can reduce the pH in any drilling fluid…

Sodium Bicarbonate

Sodium Glucoheptonate

Sodium Glucoheptonate is a product designed to extend the thickening time of oilwell cement slurries up to ~120°C BHCT. This retarder can be used in all normal Canadian cements, and is compatible with standard chemicals such as fluid loss additives, dispersants, silica flour, defoamers,…

Sodium Hypochlorite 12% Bleach

Sodium Hypochlorite 12% Bleach is used to protect ground water from bacterial contamination. It is also used to destroy polymers in de-watering applications. It can be added directly to the mud system or metered into the system with a positive displacement pump. Sodium Hypochlorite 12%…

Sodium Hypochlorite 12% Bleach

Sodium Metasilicate Anydrous (SMS)

SMS are a powder form of anhydrous sodium metasilicate. SMS are normally dry blended and used as an extender in oilwell cements. Light weight slurries can be formulated by blending SMS with the lime present in cement or by the addition of calcium chloride to produce a calcium silicate gel. This…

Sodium Silicate

Sodium Silicate is a multifunctional cement liquid additive that allows custom preparation of the cement slurry at the rig site or can be used to preflush casing and formation. As a cement extender Sodium Silicate helps reduce cement density, prevents segregation of solids, accelerates set…

Sodium Sulfite - Catalyzed

Sodium Sulfite - Catalyzed (Na2SO3) is used as an oxygen scavenger in water based mud systems. It is soluble in water and catalyzed using a cobaltous compound. It may also be used as an anti-oxidant to prevent polymer degradation. As an oxygen scavenger it is added continually until the residual sulfite…

Sodium Sulfite - Catalyzed

Sodium Sulphate

Sodium Sulphate (Anhydrous Na2SO4) is commonly referred to as salt cake. Sodium Sulphate reacts with cement hydration products such as calcium hydroxide to form calcium sulphate. The calcium sulphate reacts with aluminates having an expansive effect on cement. Improved cement bonding is one…

Sodium Sulphate

Soil Bags

Soil Bags come in 102 cm (W) x 102 cm (L) x 102 cm (H) size with Duffle Top. These bags are made of lightweight flexible packaging and are stackable for easy storage. These bags are reusable and competitively priced. They are suitable for a variety of industry requirements. 

Soil Bags

Sonic Splits and Split Caps

Di-Corp's manufactured PVC Sonic Core Sample tubes are made from PVC pipe which has been machine split down the center producing two exact halves. These split tubes give the drill contractor a very durable core sample container that will ensure the sample will make it to the lab safely and intact.

Sonic Splits and Split Caps

Spare Parts

Di-Corp offers a range of Spare Parts. For the full range of products or to request a specific product please contact Di-Corp.  Example products include the following...  Part Number Description EX1539 Chamber ASM 50 mL Retort No Thread E30208 Diaphragm/Rubber Boot 1/2 Area…

Spare Parts

Split Steel Casing

Di-Corp manufactures split steel casing to provide protection for cabling along bridges or underneath rail lines. For bridge applications we manufacture custom support brackets, standard couplings, heavy duty 2 part couplings as well as expansion joints in black steel or galvanized finishes. Custom…

Split Steel Casing

Staflo (Regular and Exlo Supreme)

Staflo is a low molecular weight, polyanionic cellulose polymer of high purity. It is available in Regular and Exlo Supreme grades and is a primary fluid-loss reducer for water-based drilling fluids. Staflo Regular also provides secondary viscosity. When fluid loss control without additional viscosity…

Staflo (Regular and Exlo Supreme)

Stainless Steel Screens

Di-Corp offers a full line of Variperm Stainless Steel Well Screens with a number of end fitting options. Stainless Steel Screens are offered in a variety of sizes, schedules, lengths and with a variety of end fitting types. Custom screen orders on any configuration is also available (quick turnaround…

Stainless Steel Screens

Standard Flow Foot Valves

The Standard Flow System is the most popular inertial pump. This system is best suited for 1” to 2” ID monitoring wells and can provide lifts of 150 to 200 feet. Flow rates can be as much as 1 gallon per minute. The Standard Flow System is suitable for a variety of sampling environments.…

Standard Flow Foot Valves

Standard Wireline Drill Rod

Manufactured to the highest standards of quality and precision, Di-Corp offers a wireline drill rod solution that improves your bottom line and increases your competitiveness. Each stage of the process, from material selection to manufacturing, packaging and handling, is controlled and supported…

Standard Wireline Drill Rod

Stardril

Stardril is a highly derivatized polyose specifically developed as a filtration control additive for drilling and completion fluids in the Canadian market. Stardril’s synergy with bentonite and other polymers enhances the shear thinning properties of drilling fluids, which results…

Stardril

Static Gel Strength Measurement Device, 20,000 PSI

The Static Gel Strength Measurement (SGSM) device is an accessory component to the Ultrasonic Cement Analyzers (UCA), as shown in the picture. It uses a vanned bob to condition a cement slurry inside a pressurized test cell and intermittently measure static gel strength at down-hole conditions.…

Static Gel Strength Measurement Device, 20,000 PSI

Static Gel Strength Measurement Device, 5000 PSI

The Static Gel Strength Measurement (SGSM) device uses a vanned bob to condition a cement slurry inside a pressurized test cell and intermittently measure static gel strength at down-hole conditions. By directly measuring the forces required to initiate movement in the sample, the SGSM provides an accurate…

Static Gel Strength Measurement Device, 5000 PSI

Steel Casing

Di-Corp can supply steel casing in a wide array of sizes for a variety of applications ranging from 4”-12” in SCH 20-80. Di-Corp offers plain end, beveled end, inserted joint and thread & coupled ends. Steel Casing is offered in bare, black or galvanized finishes.

Steel Casing

Stimpro 763

Stimpro 763 is a water soluble surfactant blend used to penetrate and disperse oil wet solids.  Stimulation: As an additive added to acid, Stimpro 763 will remove hydrocarbon film from oil coated scale or hydrocarbon covered carbonate rock. This allows for better penetration of hydrochloric acid.…

Stirring Hot Plate

Di-Corp offers three types of Stirring Hot Plates. Large Stirring Hot Plate, Small Stirring Hot Plate, and Square Stirring Hot Plates.  Large Stirring Hot Plate Volt: 115 or 230 Speed: 60 - 1,150 RPM Temperature: 41° - 1,022°F (5 - 550°C) Surface Size: 5" × 7" (13 × 18 cm)…

Stirring Hot Plate

StopLoss

Earth Pro StopLoss is a polymer that will expand 300 times its volume in fresh water (50 times in salt water). This remarkable property makes it an excellent medium for plugging fissures and cracks encountered in drilling operations preventing the further loss of drilling fluid.

StopLoss

Sulphamic Acid

Sulphamic Acid is a dry, non-volatile, non-hygroscopic, stable solid. It is soluble in water and forms a strongly acidic aqueous solution that is comparable in acidity to the common strong mineral acids, but it can be safely handled and stored in the dry form. Sulphamic Acid is used to reduce the…

Sulphamic Acid

SuperSleeves

Unlike any other groundwater sampler, the HydraSleeve instantaneously cores a whole water sample from a defined vertical and horizontal interval (usually within the well screen). HydraSleeve samples do not blend fluid from different vertical zones or pull water in from outside the well screen,…

SuperSleeves

Support Brackets

Di-Corp can provide custom Support Brackets for a wide range of applications whether you want to attach to an existing steel structure or along a concrete girder bridge. Di-Corp offers Support Brackets with CWB welds and engineered drawings for any application.  Contact us today for your next custom…

Support Brackets

Surge Blocks

Surge Blocks are an excellent well development tool. It simply press fits over the body of the Standard Flow or High Flow foot valve (D-25 or D-32). The inertial pump has a substantial capacity for developing monitoring wells because of the cyclical action of the valve in the well screen area. This…

Surge Blocks

SynVis D

Earth Pro SynVis D is 100% active, dry granular polymer that disperses readily, resulting in easy mixing without lumps or fish eyes.  Earth Pro SynVis D is primarily used for viscosity in fresh water systems, gel and/or polymer based systems. It can also be used as a viscosified filtrate to…

SynVis D

SynVis L

Earth Pro SynVis L is a high yield, readily dispersible, anionic, liquid synthetic polymer formulation that can act alone or as part of a complete fluid solution for varied demanding drilling situations.

SynVis L

T-352 Biocide

T-352 Biocide is a registered biocide under Agriculture Canada’s “Pest Control Products Act” (Registration# 22698). T-352 Biocide is a non-ionic, glutaraldehyde-based biocide in a clear liquid form. It is effective in controlling both aerobic and anaerobic (sulfate reducing)…

Teflon (FEP)

FEP is one of three different types of Teflon manufactured by Dupont and is the best choice of material for use in tubing. It is a chemically-inert, temperature resistant tubing product with good transparency and weatherability.

Teflon (FEP)

Test Strips

Di-Corp offers a range of Test Strips. For the full range of products or to request a specific product please contact Di-Corp.  Example products include the following...  Part Number Description E60945 Strip Test Chloride Ion LR (30-600 ppm) E60951 Strip Test for Nitrate (10-500…

Test Strips

Therm-Ex Grout

Therm-Ex Grout is an engineered system for use as back fill material in earth-coupled heat pump systems. Its elevated thermal conductivity and low permeability allow for excellent heat exchange while protecting groundwater supplies. Therm-Ex Grout should be pumped using a positive displacement…

Thermal 40 Cement

Earth Pro Thermal 40 Cement is typically used where wellbore temperatures exceed 115°C, due to well depth, or physical treatment (i.e. steam flooding). Under extreme temperatures, Class G cement undergoes sever and detrimental chemical structure changes causing a rapid breakdown of cement…

Thermal 40 Cement

Thermocup with Removable Stainless Steel Cup

The Thermocup is designed for controlling the temperature of a mud sample while taking readings with a viscometer. The holes in the stage of the viscometers have been positioned to hold the heated cups at a 45° angle to the line of the instrument for better accommodation of thermometers…

Thermocup with Removable Stainless Steel Cup

Thermoplastic Elastomer (TPE)

Thermoplastic Elastomer (TPE) is a soft and flexible polymer with excellent physical properties, making it a good alternative for silicone tubing in peristaltic pumps. Di-Corp stocks tubing sizes L/S 15 and L/S 24. TPE Specifications L/S 24 25' coil ID=0.25" L/S 15 25' coil ID=0.19"

Thermoplastic Elastomer (TPE)

Thread Shield

Earth Pro Thread Shield is factory coated on the box and pin ends of every Drillers Edge Rod and Casing. It’s then protected with biodegradable plastic end caps to ensure it remains in place until used on the first make and break of the joint.

Thread Shield

TKPP

TKPP is a highly soluble, more environmentally friendly, low sodium alternative to SAPP. It is used as a replacement to SAPP due to its low sodium content where LWD is the preferred method of disposal. TKPP’s main application is for the dispersion of mud rings when water drilling…

TKPP

Torq-Glide

Earth Pro Torq-Glide is used as a lubricant in brine, fresh-water and oil based drilling fluids to reduce torque and drag in horizontal or highly deviated hole sections. Earth Pro Torq-Glide reduces friction in areas where the drill string comes into contact with formation or casing. It may be…

Tricone Bits

Jentech (a division of Di-Corp) offers a variety of Tricone bits in various diameters. Tricone Bits are designed for high rates of penetration and durability in soft to medium formation drilling. They help you achieve your sampling target at a lower total cost. Tricone Bits offer standard circulation…

Tricone Bits

Tripod

Polymetra's lightweight tripod allows a single operator to execute a survey in vertical a borehole when the drill rig has already left. The kit consists of a detachable pulley, telescopic legs, adjustable ties and 3 ground anchors. 

Tripod

Tru-Bore

Tru-Bore is a highly concentrated, bentonite based drilling fluid used for difficult drilling operations in both vertical and horizontal borings. Tru-Bore is non-toxic and environmentally safe. It serves as a true one-sack solution for horizontal drilling applications. It is extremely effective…

Tru-Bore

Tube & Pipe Bends

Di-Corp offers long and short radius Tube & Pipe Bends for pneumatic conveying systems. Internal mandrel bending equipment provides top quality bends from 2” up to 12” in Schedule 40 and Schedule 80 as well as in bare, galvanized or black finishes that cover all standard tube and pipe…

Tube & Pipe Bends

Tubing Cutters

Tubing Cutters are a safe and efficient way to cut tubing. The durable Teflon coated blade slices through HDPE tubing cleanly and easily. They are faster and safer to use than a utility knife. The rotating/rocking motion produces straight, clean cuts. 

Tubing Cutters

TurboCut

Earth Pro TurboCut is a liquid lubricant specifically designed to be added directly to water based systems. No tripping to grease and re-grease rods. Provides constant lubrication for rods and down hole tools to extend life, decrease torque and increase rate of penetration even when used in…

TurboCut

Ultra Seal (XP, C and Plus)

Ultra Seal is a blend of specific micro-sized cellulose fibers, combined with a blend of organic polymers and lubricity enhancers. It is a light tan powder that is insoluble in water. Ultra Seal-XP is the fine grind material that is most effective for controlling seepage and providing…

Ultra Seal (XP, C and Plus)

Valve Wrench

A Valve Wrench is a handy tool which helps ensure that your foot valve is properly installed on the pump tubing. The Inertial Pump can develop considerable pressure and by attaching your valves with the valve wrench you can be sure that they are properly connected. A Valve Wrench ensures that valves…

Valve Wrench

Van Ruth Plugs

Van Ruth Cementing & Wedging Plugs (CW Plug) are highly effective as bridge plugs for spot cementing sections of holes and are also used for wedging in off bottom situations for branch hole operations. For bridging and spot cementing the CW Plug is inserted and pumped down an open rod string. Spring…

Van Ruth Plugs

VK Grout Plugs

VK Grout Plugs are constructed of zinc and rubber with mild steel pipe in the center. This allows the grout plug to be drilled out. The VK grout plug can be adapted to drill rods by a left hand pipe thread which allows them to be removed after cementing. They include a built-in check valve which seals…

VK Grout Plugs

VOC Sample Kit

The method for collecting volatile samples with the Inertial Pump is very simple and all that is required is 8 feet of narrow diameter VOC Tubing.  After purging the well, approximately 7 feet of the VOC tubing is inserted inside the Standard Flow or High Flow pump's tube, leaving about one foot…

VOC Sample Kit

Walnut (Coarse, Medium and Fine)

A lost circulation material of ground Walnut is available in three grades, fine, medium, and coarse; ranging in size from 100 mesh to 6 mesh. Used as a lost circulation material or bridging agent due to its granular nature. Walnut is chemically inert and may be added to any mud system. Walnut is…

Walnut (Coarse, Medium and Fine)

Warm Plug Cement

Earth Pro Warm Plug Cement is a blend of Earth Pro Oilwell ‘G’ Cement with a retarder designed specifically for use in wireline operations. It has been developed to enable the wireline operator sufficient mixing and placement time so as to avoid potential premature slurry set in situations…

Warm Plug Cement

Water Saver Subs

Water Saver Subs are available in all sizes and are designed to retain drilling fluid in scenarios where the fluid column is normally lost due to gravity. These subs are machined from high quality alloy steel and depending on the size and thread configuration, may be heat treated and/or identified with…

Water Saver Subs

Water Swivel Adaptor Subs

Water Swivel Adaptor Subs are available in all sizes to adapt your drill string to the Water Swivel. These subs are machined from high quality alloy steel and depending on the size and thread configuration, may be heat treated and/or identified with special geometries. For more information or for further…

Water Swivel Adaptor Subs

Waterline Coil Heater

The Waterline Coil Heater is supplied as a base coil unit mounted on a heavy duty steel frame. Fuel type, power options and safety equipment are selected by user according to project requirements. Frame is skid mounted and equipped for optional tires.

Waterline Coil Heater

Weighted Polyethylene EcoBailers

Weighted Polyethylene EcoBailers use the same design as our popular Clear PVC EcoBailers. They feature a thicker tube wall than competing models. As a result, Weighted Polyethylene EcoBailers are less likely to bend when handled. Bent bailers will oscillate when travelling down the well column and they…

Weighted Polyethylene EcoBailers

Weld Rings

Weld Rings are used as a coupling for steel casing that is going to be welded to join the casing together. This method helps to strengthen the weld as two welds are now required versus one and the ring also provides a cleaner line to weld on. Di-Corp offers a range of Weld Rings in various sizes and…

Weld Rings

Well Caps

The Well Cap is the cover on top of the well casing that sticks out of the ground. It serves many purposes. Most Well Caps include a vented screen so that the pressure difference between the inside and outside of the well casing may be equalized when water is pumped from the well. However, the Well…

Well Caps

Well Markers

Di-Corp's flexible high visibility orange Well Markers are made to attach to a standard Steel Casing Protector to clearly identify a completed well that may be obstructed from view. We carry 1-1/2" x 4-1/2" Well Markers as well as 1-1/2" x 7-1/2" Well Markers. Contact us for further size requirements. 

Well Markers

Well Sand

Well Sand is used for deep bed in-ground wells to form a barrier between the screens and the natural deposit of the land, which in turn, allows for the well to provide very clean water. Other applications can include dewatering well and monitoring wells. 

Well Sand

Wooden Core Boxes

Di-Corp manufactured Wooden Core Boxes are more resistant to weather and will endure on site handling better then cardboard core boxes. Our Wooden Core Boxes can be used over and over again; are easy to handle and to stack. We manufacture everything locally and we are able to accommodate any possible…

Wooden Core Boxes

Wooden Quad Box

A Wooden Quad box is used as a well protector. It sits on the ground by the well to prevent anything running over the well and damaging it. Di-Corp manufactures these boxes in a variety of sizes. Please contact us for more information or with specific size requests. 

Wrenches

Di-Corp offers Inner Tube & Outer Tube Wrenches, Gripper Pad Wrenches, Stationary Jaw Wrenches, Swing Jaw Wrenches, Particle Wrenches, and Retaining Ring Wrenches for all common sizes. Di-Corp also offers Pipe Wrenches in 18", 24", 36" and 48" sizes. Drill Rod Wrenches are also available…

Wrenches

Wyoming Gel

Oilfield Application: Sodium montmorillonite (Earth Pro Wyoming Gel) is sold under various trade names. In fresh water it yields 92-100 bbl/ton of 15 cps viscosity mud.  Earth Pro Wyoming Gel conforms to the following API specifications (API Spec 13A, Section 4 Fourteenth Ed. Aug. 1991). Suspension…

Wyoming Gel

XL-Defoamer

Earth Pro XL-Defoamer is a powerful defoamer intended for use where mild to severe foaming of aqueous based fluids has occurred. It is effective at all pH ranges, at high temperatures and over a wide salinity range. Normal treatment for light foam is 0.3-0.9 L/m³ and with more difficult foams,…

XL-Defoamer

Z-50

Z-50 is the finest metallic zinc compound on the market today. It is specially formulated and tested to insure the best brushability and maximum protection under the widest temperature ranges. Z-50 has been test proven to significantly reduce stresses within tool joints, compared to a typical zinc compound.…

Zinc Carbonate

Zinc Carbonate is used as an H2S scavenger in water based drilling muds. As a pre-treatment, concentrations vary from 6.0-14.0 kg/m³ depending on the severity of the expected sour gas. To effectively control the carbonate added, add approximately 0.25 kg of lime for every kilogram of Zinc Carbonate…