Products

DTH & RC Drilling Products

Casing Advancement System

Casing Advancement Systems consists of drilling through overburden while advancing the casing into the hole at the same time. Casing Advancement Systems are the preferred method for drilling in difficult ground conditions including loose formations and where boulders are present. Jentech (a division…

Casing Advancement System

Casing Alignment Clamps

Casing Alignment Clamps are simple, quick, and easy to use. Pull the hand lever and the flat cross bars quickly align two casing ends so they can be accurately tack-welded together. Remove the clamp and finish the welding. Jentech (a division of Di-Corp) offers a range of Casing Alignment Clamps in…

Casing Alignment Clamps

Chain Wrenches

Chain Wrenches are designed for use with a pipe machine for bucking up and bucking off tool joints. Larger sizes may be used for breaking out drill collars, reamers or similar heavy jobs. Jentech (a division of Di-Corp) offers a range a Chain Wrenches to suite any drill need. Please visit the Jentech…

Chain Wrenches

Drag Bits

Drag Bits are usually designed for use in soft formations such as sand, clay, or some soft rock. Drag Bits are often used in the following applications water wells, mining, geothermal, environmental and exploration drilling. Jentech (a division of Di-Corp) offers Drag Bits in both Step type and Chevron…

Drag Bits

DTH Hammer & Bits

DTH Hammer and Bits are used for drilling holes through a wide range of rock types. Jentech (a division of Di-Corp) offers a range of DTH Hammers and Bits for various drilling needs. They test various DTH Hammers and Bits in everyday situations within the Water Well drilling and Mineral Exploration…

DTH Hammer & Bits

DTH Rods & Tools

Jentech (a division of Di-Corp) works closely with customers to design and provide high quality drill steel and subs for virtually all methods of drilling. From conventional drilling to core drilling, reverse circulation and dual tube, Jentech can help, with experience, quality steel and service.…

DTH Rods & Tools

Elevators

Elevators are a hinged device with handles that are used to wrap around the tool joint of drill pipe, casing or lift nipples (for collars) to facilitate the lifting or lowering of them singly or of the drill string as a whole. To latch around a piece of pipework a set of Elevators need…

Elevators

Hole Openers

A Hole Opener is a device used to enlarge the borehole during a well drilling operation. It can be positioned either above the drill bit or above a pilot run inside the existing borehole. Hole opener arms have to sustain heavy loads during operations and are generally…

Hole Openers

Rotary Bits

Jentech (a division of Di-Corp) stocks a large selection of drill bits on the shelf both new and re-run tricone bits. They stock bits of all sizes and cutting structures including Rotary Bits. From TCI button bits to Steel tooth or Drag bits they can recommend the right bit for you and provide the quality…

Rotary Bits

Tricone Bits

Jentech (a division of Di-Corp) offers a variety of Tricone bits in various diameters. Tricone Bits are designed for high rates of penetration and durability in soft to medium formation drilling. They help you achieve your sampling target at a lower total cost. Tricone Bits offer standard circulation…

Tricone Bits